Trouble Shooting; Service And Maintenance Etc; Guarantee And Service - Nilfisk-Advance One Instructions For Use Manual

One
ID

Trouble shooting

EN
Repair or service of electrical com-
ponents such as cord or motor, must
only be carried out by an authorized
service center.
If the machine
does not start
Reduced suc-
tion power
If the machine
stops
14
Check that the plug
is correctly fi tted to
the wall socket.
A fuse in the
building may have
blown and needs to
be changed.
The cord or plug
may be dam-
aged and must
be repaired by an
authorized service
center.
The dust bag may
be full and needs
to be changed, see
instructions.
The pre-fi lter, the
(H)EPA fi lter can be
blocked and have
to be changed, see
instructions.
The bent tube,
hose, tube or
nozzle may be
blocked and needs
to be cleaned.
The thermal fuse
may have blown,
see instructions.
Service and maintenance
• Store the machine indoors and in a
dry environment.
• Change the pre-fi lter with every
fourth dust bag.
• Change the (H)EPA fi lter once a
year
• Clean the machine surface with
a dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
• Service – contact your local dealer.
Recycling and scrapping
Recycle the wrapping and scrap the
machine according to recommenda-
tions from the local authorities.
Cut the cord as short as possible to
avoid someone getting injured on the
scrapped machine.
Environmental commitment
This machine is designed with the
environment in mind. All plastic parts
are duly marked for recycling.
Responsibility
Nilfi sk disclaim all responsibility for all
damage caused by incorrect use or
modifi cation of the machine.
Guarantee
The warranty can vary between dif-
ferent countries. Contact your local
dealer for information.

Guarantee and service

This Nilfi sk One Series vacuum
cleaner is covered by a two (2) year
guarantee on the machine, which
covers the motor, cable rewinder,
switch and casing. The nozzles, fi lters,
hoses, tubes and other accessories
are covered twelve months due to
manufacturing fault only and excludes
wear and tear.