Can-Am 2007 Outlander 500 EFI Operator's Manual page 105

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
PART/TASK
FUEL SYSTEM
Throttle body
Throttle/housing/cable condition
Fuel lines, fuel rail, connections,
check valves and fuel tank pressure
test (1)
In-line fuel filter
Fuel pump pressure test
ELECTRICAL
Spark plug (1) (5)
Battery connections
ECM connectors
Electrical connections and fastening
(ignition system, starting system,
fuel injectors etc.)
Digitally Encoded Security System
(DESS)
Condition of ignition switch, engine
start button and engine stop switch
(2)
Condition of lighting system (HI/LO
intensity, brake lamp, headlamp
aiming, etc.) (2)
Winch
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 300 km (185 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
25 H OR 750 km (470 mi)
I
(2) I, A I,A,L
I
I
I I
I
I
I
I
Refer to vehicle BASIC
GUIDE TO WINCHING
TECHNIQUES
_____________________
50 H OR 1500 km (930 mi)
100 H OR 1 YEAR OR 3000 km (1865 mi)
200 H OR 2 YEARS OR 6000 km (3730 mi)
TO BE PERFORMED BY
I,L Dealer
Dealer/
Customer
I Dealer
R Dealer
I Dealer
R Customer
Customer
I Dealer
I Dealer
I Dealer
I Customer
I Customer
Customer
LEGEND
1) Emission-related
component.
(2) Pre-ride inspection
item.
(1) Emission-related
component.
(2) Pre-ride inspection
item.
(5) Make sure
the spark plug is
correctly gapped.
103