Activate Wps - ZyXEL Communications LTE6101 Quick Start Manual

Activate WPS

You can set up a wireless network with WPS (WiFi Protected Setup) or
manually add a client to your wireless network. Activating WPS helps
you quickly set up a wireless network with strong security.
Using the physical WPS button:
1. Make sure the POWER LED is on (not blinking).
2. Press the WIRELESS ON/OFF button for more than five seconds and
release it. Press the WPS button on another WPS-enabled device
within range of the LTE Device. The WLAN LED flashes while the
LTE Device sets up a WPS connection with the wireless device.
Note: You must activate WPS in the LTE Device and in another wireless
device within two minutes of each other. See your User's Guide for more
information.
Using the WPS button in the Web Configurator:
1. Click Network Setting > Wireless > WPS, select Enable.
ENGLISH
19