Step 5 - Testing And Getting To Know Your Monitor; Sensor Pad; Indication Bar Important Icons - Angelcare ac1300 Owner's Manual

INDICATION BAR IMPORTANT ICONS

Temperature icon: Indicates room temperature
Temperature Alarm icon: Indicates Temperature Alarm is active
Pendulum icon: Indicates the Movement Sensor is active
Night View Mode icon:Night View Mode
Sound icon: Indicates that Sound function is active
Connection icon: Indicates the connection quality between the Parent Unit and the Nursery Unit.
Good connection
Battery Level icon: Indicates battery level
Empty

STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR

IMPORTANT
When in menu or sub-menu modes, sound transmission between Parent and Nursery Units will be
temporarily deactivated. ONLY movement-detection alarm will remain active (if function is activated).

5.1 - SENSOR PAD

TO ACTIVATE THE SENSOR PAD:
1 3
2
4
TO TEST THE SENSOR PAD:
1
MOVEMENT ALARM
• Alarm activates when no movement
is detected by the Sensor Pad for
20 seconds.
• Both the Parent Unit and the
Nursery Unit speakers will emit
loud warning sound.
• Movement Alarm icon will show on
the LCD screen.
10
Poor connection
1/3 Full
The Angelcare monitor can be used with the pre-program factory settings or
®
you can also customize your settings to your preference. Main menu on the LCD
display shows the different operation settings. Use the direction keys to set or
check the different functions on the Parent Unit.
Press the Menu/Select button to select an icon. The light icon will change from
blue to green to show that the icon is selected. Press VIDEO ON/OFF button to
exit or to go back to main menu when in sub-menu.
1) Press Menu/Select button to access
2) Select the Movement icon.
3) Use the up and down arrows to activate
4) Press Menu/Select button to confirm.
1) Move your hand lightly on the mattress.
2
2) Remove your hand from the mattress. After 15
Lost connection
2/3 Full Full
main menu.
or deactivate the Movement Alarm.
The Pendulum icon will appear on Parent Unit
indicator bar.
seconds you will hear a 'TIC' pre-alarm sound, and
5 seconds later the Movement Alarm will trigger.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while Sensor
Pad is in operation.
• Place the crib near a supporting wall.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF crib mobile, fans, loud music or
anything else that may cause vibration.
Out-of-Range