Voip Settings - Siemens GIGASET SX762 WLAN DSL Manual

VoIP settings

You will receive the access and configuration data for Internet telephony from your serv-
ice provider.
ì
In the Advanced Settings – Telephony menu, select VoIP.
ì
Select On if you wish to use Internet telephony (default setting).
ì
If you have already configured Internet telephony in the Basic Setup Wizard, your
VoIP account will be shown with User name and SIP domain in addition to VoIP
accounts. If you want to change a previously configured VoIP account, click Edit
(page 78).
ì
If you want to configure additional VoIP accounts, click Add (page 78).
If you have configured VoIP settings in the Basic Setup Wizard the data for your VoIP
account is shown in this line. You can edit this data or add new data for additional
accounts.
ì
You can generally accept the default settings for Voice Quality:
– Upstream rate: The upstream transmission rate (upstream bandwidth) varies
depending on the provider and DSL tariff and is normally much lower than the
transmission rate for downstream data traffic. If there is upstream data traffic at
the same time over the DSL line, the voice quality may not be optimum.
To ensure optimum voice quality, you can use the Upstream rate option to
define the bandwidth, which is to be used as a maximum for your VoIP connec-
tion. The default value is 1000 kbit/s and should suffice under normal
circumstances.
You can change these values if necessary, but you have to find out first how high
your upstream transmission rate is. Most providers supply tools for administering
Configuring Advanced Settings
77