Updating Firmware - Siemens GIGASET SX762 WLAN DSL Manual

Updating firmware

If Siemens or your Internet service provider releases a new version of the firmware, you
can update the firmware of the Gigaset SX762 WLAN dsl. To do this you must first load
the new firmware onto your PC.
Carry out the following steps:
ì
End all network activities in the local network.
ì
In the Advanced Settings – Administration menu, select Firmware Update.
The firmware version that is currently installed on the device is displayed in the Current
firmware version line.
ì
In the Firmware update file field, enter the file with the new firmware that you
have downloaded from the Internet or click Browse to search for the file in your PC's
file system.
ì
Click OK. The firmware will now be updated.
Warning:
Do not turn off the Gigaset SX762 WLAN dsl during the updating procedure and do
not interrupt the power supply. Turning off the device can make it unusable. The
update can take several minutes.
Siemens Home and Office Communication Devices GmbH & Co. KG accepts no liability
for damage that occurs through improper use.
After a successful update, the device is automatically rebooted. All LEDs go out. The
login screen is displayed again.
To see whether the upgrade procedure was successfully completed, check the current
software version displayed in the overview of the Status menu (page 101).
Administration
99