Wpa2/Wpa With Pre-Shared Key (Psk) - Siemens GIGASET SX762 WLAN DSL Manual

Security Setup Wizard

WPA2/WPA with pre-shared key (PSK)

WPA is a more advanced procedure than WEP for protecting wireless networks. Dynamic
keys, based on TKIP (Temporal Key Integration Protocol) offer increased security. The
new standard WPA2 uses
WPA-PSK is a special WPA mode for private users and users in small companies without
their own authentication server. After a certain period of time
tion keys are automatically generated with the pre-shared key, automatically changed
("rekeying") and authenticated between the devices.
Note:
Every PC (network adapter) that requires access to a WPA-protected wireless network
must also support WPA. Information about this can be found in the operating manual
for your network adapter.
ì
Select WPA2-PSK if WPA2 is supported by all components in the wireless network.
ì
Select WPA2-PSK / WPA-PSK if some or all components in the wireless network only
support WPA.
ì
Enter a key of your choice in the Pre-shared key field (min. 8 to max. 63 characters)
and confirm it by repeating the entry. You must set up the same pre-shared key for
all wirelessly connected PCs. Use a combination of letters, digits and special charac-
ters.
ì
To go to the next step, click Next >
42
AES (Advanced Encryption Standard) for encryption.
(Rekey interval), encryp-