Siemens GIGASET SX762 WLAN DSL Manual page 65

ì
Choose the Policy type, i.e. how you would like to define the various routes for data
traffic between your local network and the Internet:
– Choose Specify interface to specify routes for clients in your local network
depending on the port used for connecting to your device (e.g. LAN port or wire-
less network connection).
– Choose Specify IP address or Specify MAC address to specify routes for clients
depending on your IP address or MAC address.
If you choose Specify MAC address, you can select PCs from the list of known
clients.
ì
Specify the routes for data traffic between your local network and the Internet:
– Enter the Connector, the local IP address or the MAC address of the clients in the
local network that are to use the respective route.
If you specify routes by entering the MAC address, you can also enter the device
name in order to identify the individual clients.
– For each route, choose the Connection service that the respective client is to use
to connect to the Internet.
A default route is used for all non-listed clients.
ì
Click Delete to delete an entry.
ì
Click Add to create a new entry with the entered data or for the selected client.
ì
Click OK to save and apply the changes.
ì
Click Cancel to reject the changes.
Configuring Advanced Settings
63