Siemens GIGASET SX762 WLAN DSL Manual page 77

Entering PCs manually:
ì
Enter the MAC address and Device name of the required PCs in the appropriate
fields.
ì
Click the Add button to add the entry to the list.
ì
Click the Delete button to delete the entry from the list.
Note: Only following deletion is the entry transferred to the list of known MAC
addresses.
ì
Apply the settings by clicking OK.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs that were
already entered manually on the router with the MAC address are displayed.
ì
Click the Add button to add the selected PC to the list.
ì
Apply the settings by clicking OK.
Note:
If you activate MAC access control, you must at least add the PC on which you are
configuring the Gigaset SX762 WLAN dsl to the list. Otherwise, you will have no
access to the user interface and will receive an appropriate error message.
If you have inadvertently denied all PCs access to the Gigaset SX762 WLAN dsl,
you have two options:
You can completely reset the Gigaset SX762 WLAN dsl (page 20).
u
You can connect a PC to the Gigaset SX762 WLAN dsl using one of the LAN
u
connections. As MAC access control only affects PCs that are connected wire-
lessly, you can use this PC to change the configuration.
Configuring Advanced Settings
75