Safety Features; Cleaning And Storage - Honeywell HZ-850 Series Manual

OPERATION
(CONTINUED)
EnergySmart Mode -
™
A smart thermostat that helps you save energy. Press SET to choose four (4) comfort settings of 65°
(18°), 70° (21°), 75° (23°), 80° (26°). This is your desired room temperature. The EnergySmart™
thermostat will automatically select the appropriate power level to best accommodate your Desired
Temperature. As the air temperature (Current Temp) in the room approaches the Desired Temperature,
the heater will automatically lower the power consumption to provide consistent warmth without wasting
energy.
The Current Temp Indicator will display the current room temperature.
To override the EnergySmart™ function, simply press SET to choose either OFF (
Continuous Heat.

SAFETY FEATURES

This heater is equipped with several devices and features for added protection:
• A tip-over switch that disables the heater if it is accidentally tipped,
• Model HZ-850 Series - 2 way shut off disabled heater if tipped front or back directions
• Model HZ-860 Series - 4 way shut off disables heater if tipped front, back or side to side
directions
• A high temperature safety control prevents overheating.
• Equipped with a thermal cut-off fuse that will permanently shut down the heater should it operate at
a higher than normal temperature.
• This heater was created using a high quality safety plastic.

CLEANING AND STORAGE

We recommend that this heater be cleaned at least once a month and before off-season storage.
• Turn the heater OFF (
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTIONS.
• Before storing, clean the ThermaWave Heater using the above-mentioned steps. Wrap the cord
around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.
6
) or ( ) and unplug it. Allow it to cool.
), LOW or HIGH