Keytools - Siemens 670 V2 Operating Instructions Manual

7. Click on "2 point."
8. Activate the control box in the "Software settings" area as shown.
9. Click "OK" to close all open dialogs.
10. Switch to the "Calibrate" tab control. The following dialog will appear:
Figure 8-9
11. Click on the "Calibrate" button. The dialog for touch calibration will appear.
12. Touch the cross hairs on the touch screen for at least 3 seconds and no longer than 10
8.3.4

KeyTools

Area of validity
The following applies to Windows 98, Windows NT, Windows 2000 and Windows XP.
Start
Start menu "Start", command "Settings > Control panel > SIMATIC Key Tools"
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Calibrate tab control
seconds. The "Calibration complete" dialog will appear. Exit the calibration by clicking on
the "Done" button.
Operating and parametrizing
8.3 Additional drivers and applications
8-13