Table of Contents
Advertisement
Operating
7.2 Operator controls on key panels
Procedure
1. Label the DIN A4 film with a laser printer with the printing templates from the options, for
2. Cut the labeling strips along the pre-printed lines.
3. Insert the labeling strips into the slots provided on the rear side of the control unit.
Figure 7-7
Rear side of the control unit with connectors and slots for the labeling strips
7.2.4
Integrated mouse
The position on which you press the middle round button determines the direction in which
the cursor moves. The amount of pressure determines the speed of the cursor.
As an alternative, connect an external mouse at the USB 1.1 port.
7-6
example.
Note
Do not insert handwritten labeling strips until the ink has dried.
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Panel PC 670 V2/870 V2, Control unit
Advertisement
Table of Contents
