Changing The Oil; Drive And Gearbox - Husqvarna LC48 e Operator's Manual

Changing the oil

The engine oil should be changed each year and every 25
working hours.
When changing the oil proceed as follows::
• Empty the fuel tank by running the machine until the tank
is empty.
• Disconnect the HT lead from the spark plug.
• Unscrew the oil filler cap.
• Use the oil pump (accessory) to empty the oil tank.
Ask where you can dispose of surplus engine oil at your
local petrol station.
• Fill with new engine oil of a good quality. See the Technical
data section.
• Check the oil level with the dipstick on the oil filler cap.
• The oil filler cap must be completely screwed down to give
a correct picture of the oil level. If the oil level is low, fill
using engine oil up to the upper level on the dipstick.
• Screw on the oil filler cap.
Charge the battery LC 53 Ee
The battery can be charged as follows:
• Remove the collector
• Push the locking open and remove the battery cover.
84 –
English
MAINTENANCE
• Loosen the battery cable connections.
• Connect the battery charger and charge the battery for
max. 24 hours.

Drive and gearbox

• Ensure the wheels and wheel axles are clean and free
from leaves, grass, etc. It is also important to keep clean
around the drive gearbox.
• On machines equipped with a catcher, the catching
system needs to be removed first.
Lift up the back shield and remove the container.
Remove the cover.
• Clean the gearbox with a brush. Also check that the drive
belt and belt pulley are undamaged, for example, no
cracks.
max
24 h