Hydraulic system PT26
2. Lift cylinder
3. Control cylinder
4. Control unit
5. Valve block working hydraulics
6. Valve block transmission
7. Wheel motors
8. Pump control- and lifting system
Changing hydraulic oil
Viscosity and quality
Hydraulic oil ISO VG.
Viscosity 46 cSt.
Consult Husqvarna AB concerning local envi-
ronmental provisions regarding types of oil,
before types of oil other than those stated by
Husqvarna are used.
Inspectionof the oil level
Open the right-hand engine cover and
remove the filler cap. The level must be
visible in the filler strainer.
REPAIR INSTRUCTIONS
9. Hydraulic pump drive system
10. Flushing valve
11. Inlet strainer
12. Radiator
13. Hydraulic filter
14. Hydraulic tank
Oil level, hydraulic tank
8043-108
8009-878
109
English-