Remote Management; Parental Control - TP-Link TL-MR3420 User Manual

3g/4g wireless n router
Hide thumbs Also See for TL-MR3420:
Table of Contents

Advertisement

Note:
If your PC is blocked but you want to access the router again, use a pin to press and hold the
WPS/Reset button (hole) on the back panel for about 5 seconds to reset the router's factory
defaults on the router's Web-Based Utility.

5.6.4 Remote Management

Choose menu "Advanced→Security→Remote Management", and then you can configure the
Remote Management function in the screen as shown in Figure 5-42. This feature allows you to
manage your router from a remote location via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service
port 80. This router's default remote management web port number is 80. For greater
security, you can change the remote management web port to a custom port by entering
that number in the box provided. Choose a number between 1 and 65534 but do not use
the number of any common service port.
Remote Management IP Address - This is the current address you will use when
accessing your router from the Internet. This function is disabled when the IP address is set
to the default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address.
If set to 255.255.255.255, then all the hosts can access the router from internet.
Note:
1.
To access the router, you should type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your router's WAN address is 202.96.12.8, and the port number
used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked
for the router's password. After successfully entering the username and password, you will
be able to access the router's web-based utility.
2.
Be sure to change the router's default password to a very secure password.
5.7

Parental Control

Choose menu "Advanced→Parental Control", and then you can configure the parental control
in the screen as shown in Figure 5-43. The Parental Control function can be used to control the
internet activities of the child, limit the child to access certain websites and restrict the time of
surfing.
TL-MR3420
Figure 5-42 Remote Management
-56-
3G/4G Wireless N Router User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents