Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find
a notice in red as shown in Figure 5-21.
Type - you can choose the type for the WEP security on the drop-down list. The
•
default setting is Automatic, which can select Shared Key or Open System
authentication type automatically based on the wireless station's capability and
request.
WEP Key Format - Hexadecimal and ASCII formats are provided here
•
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F)
in the specified length. ASCII format stands for any combination of keyboard
characters in the specified length.
WEP Key - Select which of the four keys will be used and enter the matching WEP key
•
that you create. Make sure these values are identical on all wireless stations in your
network.
Key Type - You can select the WEP key length (64-bit or 128-bit) for encryption.
•
"Disabled" means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero
key is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero
key is not promoted) or 13 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
TL-MR3420
3G/4G Wireless N Router User Guide
Figure 5-21 WEP
-38-
.