TP-Link TL-MR3420 User Manual page 58

Common Service Port - Some common services already exist in the drop-down list.

Modify - To modify or delete an existing entry.

To setup a virtual server entry:
1. Click the Add New... button.
2. Select the service you want to use from the Common Service Port list. If the Common
Service Port menu does not list the service that you want to use, enter the number of the
service port or service port range in the Service Port field.
3. Enter the IP address of the computer running the service application in the IP Address
field.
4. Select the protocol used for this application in the Protocol drop-down list, either TCP,
UDP, or All.
5. Select the Enabled option in the Status drop-down list.
6. Click the Save button.

Note:
It is possible that you have a computer or server that has more than one type of available service.
If so, select another service, and type the same IP address for that computer or server.
To modify or delete an existing entry:
1. Find the desired entry in the table.
Click Modify or Delete as desired on the Modify column.
2.
Click the Enable/ Disable All button to make all entries enabled/ disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
TL-MR3420
Figure 5-33 Add or Modify a Virtual Server Entry
3G/4G Wireless N Router User Guide
-47-