Trunk Trigger; Power-Cut Trigger - Vision TR537S User Manual

TRUNK TRIGGER

The siren will blast for 30s if the trunk is opened (without the remote)
while Armed, and the LCD pager will emit a siren sound and update its
icons as shown in Fig-10 below.

POWER-CUT TRIGGER

If you have the 1480S or 1460S which has a Standard Siren, there will be
no siren sound if the car's main battery power is cut, nor will your LCD
pager receive an update. But if you have the 1480B or 1460B with Battery
Backup Siren, the siren will sound when the main power is cut; however,
your pager still won't receive an update. But when the power is restored,
regardless of whether you have the 1480S/1460S or 1480B1460B, the siren
will blast and your pager will emit a siren sound and show the same icons
as in Fig-4 on page 11.
Also see "RESUME" on page 10 in the 1480 or 1460 Owner's Guide.
NOTE
If the car's main battery power is cut (or the battery dies and voltage
drops to around 6 volts — which can happen if you leave the headlights
on while the engine is off), the backup siren of the 1480B/1460B will
trigger. In this case, you cannot Disarm with the factory remote or with
your LCD pager, at least, not until the battery power is restored to about
10v or higher. So if you have a 1480B/1460B backup siren, the only
way to shut it off in this case is with the included siren keys. See pg.12
in the 1480 Install Guide or pg.14 in the 1460 Install Guide for details.
© 2 0 1 1 - 2 0 1 6 K I R A M E K , I N C .
Requires 1460 WHT/BLK wire connection.
TRUNK TRIGGER
FIG-10: Pager LCD Icon Change Upon Trunk Trigger
X
AL ARM TRIGGERS
TRUNK
ICON
FLASHES
16