Panic Mode - Vision TR537S User Manual

System Operation
HIGH SECURITY DISARM continued...
Your first press of Button I, II or III stops the trigger (i.e., kills the siren,
or kills hazard light flash if in Silent Mode). Your second press Disarms
the system. In other words, "two presses" are required to Disarm when-
ever something triggers the full siren blast.
NOTE
For the first few seconds after the pager siren tone (or vibration) begins,
you may not be able to disarm with 2 presses. If you wait 3 seconds or
so, 2 presses will always work (you can stop the siren with one press, and
disarm with the second). But during the first few seconds, it may take
multiple presses before you can stop the siren and disarm.

Panic Mode

Panic Mode allows you to trigger the full 30 second
siren blast from your remote, whether the system
is Armed or Disarmed. Press Button-I or Button-III
for 3 seconds. When you release, the pager icons will
update as shown in Fig-4 below, and the pager will emit a siren tone (or vi-
brate). Vehicle hazard lights will flash (if supported), the Status LED will flash
rapidly, and the siren will go off for 30s. (You can also trigger Panic Mode with
Button-II to flash the Hazard lights, if supported, but the siren will not trigger.)
To stop Panic Mode and silence the siren, simply press Button I, II or
III for a short duration (1 sec. or less) and release. Note that you must wait
approximately 4 seconds after you initiate Panic Mode before you press Button
I, II or III, otherwise your button press will be ignored and the siren will keep
sounding.
11
PANIC
V I S I O N R F P A G I N G S Y S T E M U S E R ' S G U I D E
Push Button
ICON
FLASHES
I or III
for 3 sec.