System Operation; Arming - Vision TR537S User Manual

System Operation

ARMING

NORMAL ARMING
This method is the typical way to Arm,
with the shock sensor enabled. Ensure
that all doors are closed and then press
Button-I on the Pager remote. After you
press Button-I, the doors will lock and hazard lights will flash once (if
supported). The siren will chirp 1 time, the Pager remote will beep once
and update (see Fig-1 below), and Status LED will light for 5 seconds.
(The siren can't be triggered while the LED is lit — See "Error Chirp" on
the next page.)
SILENT MODE ARMING
This method of Arming will complete-
ly disable the siren (no confirmation
chirps, no warning chirps, no siren
blast).
lease. The doors will lock and hazard lights will flash once (if supported).
The Pager will play a melody and update (see Fig-2 below), and Status
LED will light for 5 seconds. (The siren can't be triggered while the LED
is lit — See "Error Chirp." )
FIG-2: Pager LCD Icon Change After "Silent Mode" Arming
7
FIG-1: Pager LCD Icon Change After Arming
Press Pager Button-II then re-
Be sure to read the "Arming Mode
Note" at the bottom of page 9.
V I S I O N R F P A G I N G S Y S T E M U S E R ' S G U I D E