Delivery Checklist; Handlebar; Grassbag Assembly; Prevent Engine Damage - Hayter Harrier 48/56 Pro Owner's Handbook Manual

ASSEMBLING THE MOWER BEFORE FIRST USE

Delivery Checklist

Remove the mower from the packaging and check that
the following items have been supplied correctly. If any
items are missing contact, your local Hayter dealer.
2. Grassbag 4. Warranty Reg Card
To prevent accidents cut off the long ribbon attached to
the grassbag and discard.

Handlebar

allow the handlebar to pivot. Hold the engine stop lever
in towards the handlebar and unfold the handlebar to the
operating position, before releasing.
Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not
become snagged at the pivot point.

Grassbag Assembly

the frame (1) into the grassbag (2), ensuring that the han-
dle is above the grassbag as shown. Attach plastic clips
(A), (B), (C) and (D) to the grassbag frame.

Prevent Engine Damage

To prevent engine damage the engine is shipped
the correct grade of oil and petrol before starting the
engine.

Oil Type

oil. Never use additives with recommended oil.
To prolong the life of your engine it is important that
'Maintenance Schedule'.

Check Oil Level

the mower on a level surface, unscrew and remove the
and remove it to check the oil level.
The oil level is correct when it is at the full mark on
the dipstick. DO NOT OVERFILL.

Fuel Type

Always use clean, fresh unleaded petrol. Purchase fuel
2
1
B A
D
C
7
in quantities that can be used within 30 days. Never mix
oil with petrol. For added engine protection Briggs &
Stratton recommend the use of their fuel additive which
is available from an authorised Briggs & Stratton service
dealer.
Fill to base of neck to allow for fuel expansion. Do not
0.15
Litres