Wm8B Bodypack Transmitter - PROEL RMW821 User Manual

WM8B BODYPACK TRANSMITTER

See FIG. 3 at page 29:
19. ANTENNA
This is the transmitting antenna: do not force it, disconnect it or try to replace it with a different one.
20. SET BUTTON
Press and hold this button for 3 seconds and you can access the BODYPACK SET UP. Using the UP and
DOWN buttons you can scroll the available options:
a.
buttons to scroll between 0-99. When you have selected the desired channel, press SET button again
to confirm.
b.
DOWN buttons to scroll between 821-832 and 863-865 MHz at 25KHz step. When you have selected
the desired frequency press SET button again to confirm.
c.
use UP and DOWN buttons to choose between
SET button.
d.
and DOWN buttons to choose between
Each option must be confirmed pressing again the SET button.
e.
21. UP BUTTON
Pressing this button after the SET button you can change the value of the option selected.
22. DOWN BUTTON
Pressing this button after the SET button you can change the value of the option selected.
23. LCD DISPLAY
The LCD display shows various information:
a. This is the channel number: it can be set automatically using the IR sync procedure as described in
RMW821 MENU OPTIONS above, or it can be set manually as described at point 20.a.
b. This is the RF frequency, corresponding to the selected channel, or the channel number.
c. These symbols show the lock status of the WM8B.
d. This is the battery level:
the batteries are fully charged and you have 6-8 hours of working operation.
to choose the RF channel manually: press SET button again and use UP and DOWN
to choose the RF frequency manually: press SET button again and use UP and
to choose which information is shown on the display: press SET button again and
to display the channel number. Each option must be confirmed pressing again the
to lock the bodypack from involuntary changes: press SET button again and use UP
to exit from SET UP.
to display the frequency or
to lock it or to unlock it.
11