Battery Replacement; Accessories - PROEL RMW821 User Manual

Table of Contents

Advertisement

Available languages

Available languages

the batteries are half charged.
the batteries are almost discharged and you have few minutes of working operation:
batteries replacement is suggested as soon as possible.
With a flashing symbol the batteries are fully discharged.
24. AUDIO INPUT
3.5mm mini-jack input socket to connect the supplied microphone or other microphones.
25. AUDIO LEVEL
This potentiometer sets the audio level: it can be used to set an optimal level for the microphone
connected at the input.
26.
and MUTE BUTTON
Press this button to MUTE (the symbol
disappears) the microphone. Press and hold for 3 seconds to switch on and off the transmitter.
27. IR
This is the infrared sensor for receiving the channel setting from the RMW821 receiver. Expose this
sensor to the receiver's IR sensor during the frequency sync procedure (see RMW821 MENU OPTIONS).
Note: in order to expose the IR port the cover must be removed.
28. BATTERIES INLET
Push the button and slide down the battery cover to access the battery inlet and the IR receiver sensor.
When replacing the batteries respect always the polarity marked inside the battery inlet.

BATTERY REPLACEMENT

For the Battery replacement use always 2x 1.5V AA size LITHIUM or ALKALINE type for the best
performances. You can use also rechargeable batteries but in this case the operating time is shorter. Good
quality ALKALINE batteries guarantee an operating time of about 8 hour.
Be careful to respect always the polarity marked inside the battery inlet.
Always remember to remove the batteries if you don't use the microphone for a long period of time: this will
avoid the corrosion of the battery contacts.

ACCESSORIES

The following table shows all the accessories available for the RMW821 system (for more information visit
the PROEL web site www.proel.com):
Proel code
Description
ADRK1AZ
19" rack adapter for 2 RMW821 units
UHFSPLITAL
Antenna Splitter with booster for 4 RMW821 units, 1 rack unit (TNC connector)
ANT700
4 dB GAIN Yagi directional Antenna for mic stand (TNC connector)
HCM10V2
High performance Cardioid Headset Microphone for singers (body colour)
HCM08PRO
High performance Omnidirectional Headset Microphone for actors (body colour)
HCM23SE
Premium Omnidirectional Headset Microphone (body colour)
HCM38SE
Premium Cardioid Headset Microphone for singers (black colour)
LCH370
High-quality Cardioid miniature Broadcast Lavalier Microphone (black colour)
LCH420
Premium Omnidirectional miniature Lavalier Microphone (body colour)
12
appears on the receiver display) or un-MUTE (the symbol

Advertisement

Chapters

Table of Contents
loading

Table of Contents