Propeller Removal/Installation; Standard Models - Mercury 40 Service Manual

Propeller Removal/Installation

Standard Models

If the propeller shaft is rotated while the engine is in gear, there is the possibility that
the engine will crank over and start. To prevent this type of accidental engine start-
ing and possible serious injury caused from being struck by a rotating propeller,
always shift outboard to neutral position and remove spark plug leads when you
are servicing the propeller.
1. Shift outboard to neutral position.
2. Remove the spark plug leads to prevent engine from starting.
3. Straighten the bent tabs on the tab washer.
90-828631R3 MARCH 1999
WARNING
N
a
N
GENERAL INFORMATION
Page 1C-7