Table of Contents
Advertisement
RT601HS_WV_EN.book 57 ページ ２００５年８月３日 水曜日 午後３時３１分
WV_EN.book 55 ページ ２００５年８月３日 水曜日 午後３時３１分
Finalizing a disc
VR mode
Video mode
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
k 53 ページ ２００５年８月３日 水曜日 午後３時３１分
Note that the disc name will appear in the title menu after
Timer recording FAQ
you finalize a disc. Make sure the disc name is as you
want it before you finalize the disc as it can't be changed
afterwards. If you want to rename the disc, see Input Disc
Frequently Asked Questions
Name on page 104 before starting the steps below.
２００５年８月３日 水曜日 午後３時３１分
• Even though the timer is set, the recorder doesn't start
er Recording
recording!
e suggests, Easy Timer Recording makes
Important
Check that the disc loaded or HDD is recordable, not
a timer recording as simple as possible.
locked (see Lock Disc on page 104), and that there are
• Once you've finalized a disc recorded in Video mode,
fewer than 99/999 titles already on the DVD/HDD.
you can't edit or record anything else on that disc.
ding
However, the finalization on a DVD-RW disc maybe
r is stopped, you can also use the
• The recorder won't let me enter a timer program! Why
'undone'; see Undo Finalize on page 105 for how to do
n the remote to select the channel.
not?
this.
ess 6 then ENTER ; for channel 24,
You can't enter a timer program if the clock isn't set.
• A VR mode disc can still be recorded and edited on
NTER )
HDD
DVD
this recorder even after finalizing.
topped, you can also use the +/–
• What happens when two or more timer programs
nt panel to select the channel
1
Load the disc you want to finalize.
overlap?
Make sure that the recorder is stopped before
CH
icture quality
Basically, the program with the earlier recording start
proceeding.
DE button to set the picture
time has priority. However, the recorder will start
1
uality modes
:
me.
2
Press HOME MENU and select 'Disc Setup'.
recording the program with the later start time after
es about one hour of
ture quality/recording time above
the earlier program is finished. If two programs have
3
Select 'Finalize'.
c.
ctions.
the same times (but different channels, for example),
the program set most recently takes priority.
quality, used for most
utton to select the audio
Disc Setup
ENTER
hours of recording time
HOME
Basic
If VPS/PDC is active for two timer programs that are
MENU
RETURN
hannels on page 32 for more on
Initialize
programmed to start at the same time, then the
Finalize
Finalize
quality than SP, but
Optimize HDD
program that actually starts first takes priority.
n a DVD to about four
n VR mode, if a broadcast is
REV SCAN
FWD SCAN
io channels are recorded, allowing
uality than LP, but gives
audio channel on playback. The
Simultaneous recording and
time on a DVD disc.
his is when the picture quality is set
4
Select 'Finalize' from the finalize options, then
case you do need to select the
playback
er quality than EP, but
'Next Screen'.
REC MODE
ore recording.
cording time on a DVD
VR mode
HDD
5
For Video mode discs only, select a title menu
tart recording.
style, then select 'Yes' to start finalization or 'No' to
cording end time, press the ì REC
Lowest video quality but
A feature called Chase Play makes it possible to watch a
cancel.
ording time on a DVD
e recording time increases in 30
ecording in progress (DVD or HDD) from the start of the
The menu you select will be the one that appears when
p to a maximum of six hours. The
ecording (as in, playback is 'chasing' the recording). For
the 'top menu' is selected on any DVD player.
end is shown on-screen and in the
xample, perhaps you have to miss the first 30 minutes of
off between recording
hen the recording ends, the
movie on TV; you can start recording, then start
possible recording time,
y switches into standby if no other
Finalize
watching the movie, from the beginning, while the
uality.
formed.
ecorder is still recording 30 minutes ahead of you.
en Manual Recording is
OME MENU and select 'Easy Timer'.
ecording time, press ì REC .
n fact, you're not just limited to watching the recording
ge 113) you can access
n progress; you can watch anything else already on the
me settings ( MN1 –
se recording at any time, press
DVD or HDD by selecting it from the Disc Navigator
de ( LPCM ), and a super-
gain to restart the recording. (If
creen (see Using the Disc Navigator with recordable
around 15 Mbps) HDD
DD or in VR mode, a new chapter
iscs and the HDD on page 62).
Disc Navigator
Disc Setup
ording restarts)
GUIDE Plus+
Initial Setup
here is a further option,
ding, press
STOP REC.
Easy Timer
Video/Audio Adj u st
Note
ording quality for the
ding time in the previous step, you
Play Mode
1.If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize the disc. See Additional infor-
ed at the time of
Copy
ecording anytime by pressing
mation about the TV system settings on page 116 for how to change the recorder's setting.
D, the recording quality
Photo Viewer
Jukebox
isc.)
p automatically when there is no
e HDD/DVD, or after 12 hours of
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
hichever is sooner).
Note
.You can't start playback immediately after recording starts. Simultaneous playback and recording doesn't work while copying or backing up.
ve for two timer programs that are
1
2
Set the TV channel and recording quality.
1
Tip
• During recording you can turn on/off the SCART loop
through function. During recording, press the front
panel + button to switch to SCART THRU (loop
• Use the CH +/– buttons to set the channel you want
through on), or – to switch to SCART NORM (loop
to record.
though off). Note that you can't switch loop through
Restrictions on video recording
on if recording from the AV2/(INPUT 1/DECODER)
• Use the REC MODE button to set the recording
or AV1(RGB)-TV connectors. Also, loop through is
You cannot record copy-protected video using this
quality. Press repeatedly to switch between XP , SP ,
automatically reset to off after recording has
recorder. Copy-protected video includes DVD-Video discs
LP , EP , SLP , SEP and AUTO (and MN if manual
and some satellite broadcasts. If copy-protected material
finished.
recording mode is on).
is encountered during a recording, recording will pause
• DVD recording: The AUTO option automatically sets
automatically and an error message will be displayed on-
Direct recording from TV
the best recording quality for the space available on
screen.
the disc loaded at the time of recording.
Finalize
Next Screen
If you connected this recorder to your TV using a SCART
Undo Finalize
Start
Video that is 'copy-once only' can only be recorded on the
cable, and your TV supports Direct Recording, you can
• HDD recording: The AUTO option automatically sets
HDD or in VR mode (see below).
record whatever is currently being shown on the TV
the best recording quality that would fit on to a blank
When recording a TV broadcast or through an external
without having to worry about what channel preset the
DVD disc.
input, you can display copy control information on
recorder is on. Check the instructions that came with
• Press DVD to record to DVD disc, or HDD if you want
screen. (see Displaying disc information on-screen on
your TV if you're not sure whether your TV supports this
to record to the hard disk drive.
page 36).
feature.
3
Use ///
recording start date and time on the grid.
CPRM
• You can move the cursor forward or back an hour at
CPRM is a copy protection/scrambling system developed
a time using the
for the recording of 'copy once' broadcast programs.
CPRM stands for Content Protection for Recordable
Media .
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
TITLE MENU
recordings can only be made on CPRM-compatible
DVD-R (ver. 2.0/8x or higher) or DVD-RW (ver. 1.1 or
1
If necessary, load a recordable disc.
higher) discs formatted in VR mode or on the HDD.
2
Set the picture quality/recording time using the
DVD CPRM recordings can only be played on players that
REC MODE button.
are specifically compatible with CPRM.
3
Press TV DIRECT REC to start recording.
Each row of the grid is one day (you can set the timer
If you want to set a recording time, press the ì REC
Recording equipment and copyright
recording for up to a month in advance). Each column is
button repeatedly. The recording time increases in 30
Recording equipment should be used only for lawful
a 15 minute interval.
minute increments, up to a maximum of six hours. You
copying and you are advised to check carefully what is
The darker area represents time that has already passed
can see the recording time on-screen and in the front
lawful copying in the country in which you are making a
and can't therefore be selected. The lighter area is time
panel display. When the recording ends, the recorder
copy. Copying of copyright material such as films or
automatically switches into standby if no other operation
that's available.
music is unlawful unless permitted by a legal exception
is being performed.
or consented to by the rightowners.
4
Press ENTER to set the start time.
• To cancel the set recording time, press ì REC .
The start date and time is displayed in the middle of the
• This product incorporates copyright protection
• Discs recorded partially or fully on the Pioneer
DVR-7000 DVD recorder do not support this feature.
These discs will have only a text title menu when
finalized on this recorder.
6
The recorder will now start finalizing the disc.
During finalization:
Important
• If the finalization process of a DVD-RW disc is going
• Note that you must use a DVD-RW Ver. 1.1 / 2x or
to take more than around four minutes, you can
Ver. 1.2 disc to be able to use this feature.
press ENTER to cancel. Around four minutes before
completion, the option to cancel disappears.
• You may not be able to use this feature with a
DVD-RW disc that was first initialized on another
• You can't cancel the finalization of a VR mode DVD-R
recorder.
disc.
• Chase playback is not possible using a VR mode
• How long finalization takes depends on the type of
Easy Timer Recording
DVD-R disc.
disc, how much is recorded on the disc and the
number of titles on the disc. A disc recorded in VR
8:00
9:00
10:00
11:00
12:00
•
During recording, press
1/01
mode can take up to one hour to finalize. A disc
2/01
from the beginning of the current recording
recorded in Video mode can take up to 20 minutes.
3/01
press DISC NAVIGATOR and select another title to
9:30
1/01
–
SAT
play from there.
You can use all the usual playback controls, such as
CHANNEL + / –
Pr 7
REC MODE
SP
pause, slow-motion play, scan
• To stop playback, press
continue).
• To stop recording, press
continue).
• During recording or in timer recording standby, you
can't play an HDD title, DVD or Video CD/Super VCD
disc if the Input Line System setting doesn't match
the TV line system of the disc/HDD title (see also
Additional information about the TV system settings
on page 116). Also, during simultaneous recording
and playback, if the TV line system of the playback
track/title changes then playback will automatically
stop.
to move the cursor to the
PAUSE
and
buttons.
Current time
REC
STOP REC
REC MODE
Recording start time
Easy Timer Recording
TV DIRECT
REC
8:00
9:00
10:00
11:00
12:00
1/01
2/01
3/01
1/01
11:45
–
SAT
CHANNEL + / –
Pr 7
REC MODE
SP
13:00
14:00
PLAY to start playback
06
1
, or
––:––
HDD/DVD
HDD
2
and skip.
STOP (recording will
STOP REC (playback will
13:00
14:00
––:––
HDD/DVD
HDD
En
Advertisement
Table of Contents
