Table of Contents
Advertisement
RT601HS_WV_EN.book 47 ページ ２００５年８月３日 水曜日 午後３時３１分
WV_EN.book 45 ページ ２００５年８月３日 水曜日 午後３時３１分
¥ My external receiver was successfully setup. However
I have found that when the GUIDE Plus+ system has
to change to a channel with a 3-digit program number
in the external receiver's preset, it does not work. It
looks like the GUIDE Plus+ system can only send two
digits.
k 43 ページ ２００５年８月３日 水曜日 午後３時３１分
6
Use the number buttons to enter a channel
With the number of channels increasing, the number
number, then press the GREEN Action button (Next)
of digits has increased as well. While older boxes use
o confirm.
only 2 digits, newer boxes require up to 4. It is
possible that you selected an older code for your
brand during set-up. Please access the Setup Area,
２００５年８月３日 水曜日 午後３時３１分
select External Receiver and repeat the setup for your
he GREEN Action button (Frequency) to
brand. (Note: Every time you see the on-screen
e recording frequency.
question about whether the receiver has changed to
a certain channel, the GUIDE Plus+ system has sent
a different code). Try all the different codes until your
GUIDE Plus+ system can control your external
８月３日 水曜日 午後３時３１分
receiver correctly. If you have no success, try to
receive new codes overnight.
s you to set up a personal profile.
le by channels, themes and/or
¥ I used to receive data through my terrestrial antenna or
a personal profile has been set, the
analog cable without a set-top box. Now, I have
continuously scans the TV listings
Ò u pgradedÓ to a satellite system or to digital cable with
ectronic program guide
s. Whenever you access the My TV
external receiver. What should I do to receive data for
ow
Alternatively, you can press the YELLOW Action button
ms matching your profile appears.
the GUIDE Plus+ system?
+ system, the channel
Mosaic ) and use the
you can:
You can try to receive your host channel through your
le in the video window.
hannel from the mosaic, followed by
new reception method. If you have problems to
channel, theme and/or keyword.
w lets you know the
receive data we recommend that you keep your
ofiles.
The Info Area
analog terrestrial or cable connection only to receive
the various options for one-time, daily and
w is 'locked', as
opsis
data this way. It is important that you identify your
his area is reserved for additional information such as
rdings.
on above the video
that's currently showing
host channel correctly in the Editor Area.
®
news, weather reports, stock quotes, and so on, and
window always shows
DE Plus+
ELLOW Action button (Destination) to
aries by region. (Note that this feature is not available in
¥ After I performed the initial set-up I found that the line-
ecord
watching as you move
recording destination.
ll countries/regions.)
up for all the channels received via the external set top
n panels.
s grid.
box is incorrect. How do I correct this?
e
video window so that as
The Editor Area
You can change the line-up in the editor according to
in the listings grid, the
your preferences. Access the Editor Area. Select the
he Editor Area is the central location for you to manage
e with any combination of up to 16
t channel is shown in
channels that you would like to change. Change the
our channels. Any changes you make here will affect
ries and 16 keywords.
source and preset number according to your
what is displayed in the Grid Area. The Editor Area is
om the Menu bar.
s to highlight a
preferences.
mainly used when setting up the GUIDE Plus+ system to
Using the GUIDE Plus+ system
make any manual changes as necessary.
¥ I performed the set-up but after many hours I still have
W Action button to set a profile.
All the various features and areas are color-coded for
a blank EPG what is going wrong?
active on-
ou can also use the Editor Area if new channels become
ease of navigation. All screens (with the exception of
vailable in your area, or if you change from cable to
There are several possibilities:
system offers
some setup screens) have the following common
atellite, say, or move house.
e-touch
– Connections are wrong. See Connecting up on
elements:
ns according
rom the Editor Area you can:
page 13 to double check everything.
system is a
• Display/hide channels in the grid (switch the channel
– The initial setup was completed incorrectly. Try
ow or during
on/off).
setting it up again (see Setting up the GUIDE Plus+¨
he GUIDE
DVD , HDD or HDDr (Auto Replace
Video
system on page 28).
• Select a channel source ( Tuner , Ext. Rec 1 , Ext. Rec.
window
ally set your
1
.
2 , etc.).
– Your cabling and setup is OK, but the recorder has
nd easily.
not been connected for enough time to receive the TV
eplace Recording is only available as an
• Enter a channel program number.
formation for
listings data. Leave the recorder in standby overnight.
with regular daily or weekly recordings.
he GUIDE
Information
s information.
Panel
to Setting up
ore
he left of program titles.
lighted.
• Grid – Displays TV listings information for the next
on (Unlock).
Guide Plus+
to your profile, press the
seven days by channel and time.
o window becomes
ng. It is not
on.
r the remainder of your
.
• Menu bar – Gives access to the various areas of the
GUIDE Plus+ system.
G-LINK are (1)
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
timer recording, if Optimized Rec (see Optimized Rec on page 113) is set to On (and VPS/PDC is off), the recorder will adjust the
dow again, follow the
manufactured
• Information box – Shows short program
uality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 recording quality then the Re-
n button will now act as
s international
descriptions or help menus.
rding feature will automatically make the recording to the HDD instead.
9
Press
recording options:
Select a channel from the mosaic of channel icons and
press
ENTER
. Repeat this step to add up to 16 channels.
4
To add a theme to your profile, highlight
'Themes' and press the YELLOW Action button.
Areas
buttons to select a
ENTER
.
®
The GUIDE Plus+
system consists of seven Areas . All
Areas can be accessed from the Menu bar.
• Grid – The GUIDE Plus+ system Home Area.
• If you want to record to a particular HDD genre, use
Displays TV listings information for the next seven
the YELLOW Action button ( Genre ) to select one.
days by time and channel.
• Use the GREEN Action button ( Timing ) to add extra
electronic
• Search – Search for TV programs by category (eg.,
time to the end of the recording ( +0 , +10 , +20 , +30 or
Sport), subcategory (eg., Football) or keyword.
VPS/PDC
• My TV – Set up a profile and receive
• Press
recommendations according to your preferences.
recording options again.
• Schedule – Shows all scheduled recordings.
Select a theme from the Search Area categories and
• Info – Area for additional information, such as
Deleting a scheduled recording
press
ENTER
. Repeat this step to add up to four
weather (not available in all regions).
categories.
1
Highlight the left tile of a scheduled recording.
• Editor – Change channel settings.
5
To add a keyword to your profile, highlight
• Setup – Setup the GUIDE Plus+
'Keywords' and press the YELLOW Action button.
The Grid Area
The Grid screen is the main TV listings screen of the
GUIDE Plus+ system and is the first screen that you see
when you press GUIDE . You can see TV listings for the
next seven days, starting with the current day.
When you highlight a program in the Grid, you can see
information about it in the Information Box, including
title, synopsis, channel, source, time and length. If there
is an i symbol in the Information Box, it means that there
is an extended synopsis available. Press the INFO button
to see it.
2
Press the RED Action button (Delete).
In some countries, you can also see a rating for a
The scheduled event is deleted.
particular program (mostly movies). These ratings are
Use the
provided by local partners, such as TV magazines.
characters from the on-screen keyboard. When you're
From the Grid Area you can:
finished, press the GREEN Action button to exit and
• View and scroll through program listings
continue.
• Read program synopsis
6
Press
ENTER
– For external receiver users only: The connections
and setup are OK, but the external receiver was not
tuned to the correct host channel. Check the list of
host channels (see step 5 of Setting up the GUIDE
Plus+¨ system on page 28) and leave the recorder
in standby and the external receiver on overnight
Switching a channel on/off
tuned to the correct host channel.
You can choose whether or not to display a channel in the
– You live in a country/region where the GUIDE Plus+
Grid Area by switching the channel on or off in the Editor
system is not yet available. Check the list of countries
Area.
to see if you are in a region that is supported.
1
Select 'Editor' from the Menu bar.
¥ I used the One-Button-Record feature (red Action
(cursor right) to access the extended
button) to set a recording, but I recorded the wrong
channel.
If the channel to be recorded is received via the
external receiver first make sure that the external
receiver was left switched on. Next, in the Editor
Area, make sure that the channel to be recorded is
correctly set: Access the Editor Area. Check the
source and program number of the channel that you
wanted to record. Change the source and preset
numbers if incorrect.
05
If you are recording from the recorder's internal tuner
(the Tuner setting), make sure that the program
number is the same as the preset number set on this
recorder. If they are different, go to the Editor Area
2
Highlight the left channel tile of the channel you
and change the program number to match the
want to switch on or off.
recorder's preset number.
¥ The TV listings information doesnÕ t update.
3
Press the RED Action button to switch the
channel on or off.
The latest TV listings information is automatically
downloaded by the recorder overnight. This only
happens if the recorder is in standby; if the recorder
Changing the source and program number
2
( V–P )).
is left on, it will not download. When not using the
1
Select 'Editor' from the Menu bar.
recorder, please switch it into standby.
(cursor left) to display the standard
Data downloads can take several hours. The front
panel display shows EPG when downloading. If you
switch the recorder on while EPG is displayed, the
download will be canceled.
¥ The GUIDE Plus+ system is not supported in my area,
but when I switch the recorder into standby, after a
®
system.
while the front panel display shows EPG.. Can I stop
this from happening?
If the GUIDE Plus+ system is not supported in your
area, please do not set the postal code in the GUIDE
Plus+ setup (see Setting up the GUIDE Plus+¨
Ac tion bar
system on page 28). When the service starts in your
Information
area, please set the postal code again.
box
Menu bar
2
Highlight the right channel tile of the channel
you want to make a change to.
3
Press the RED Action button to change the
Grid
channel source, or the GREEN Action button to enter
a program number.
Each press of the RED Action button changes the
channel source ( Tuner , Ext. Rec 1 , etc.). To set a
buttons followed by ENTER to select
program number, use the number buttons to enter a
program number then press
make sure that the program number matches the preset
number of this recorder for what you want to record).
to activate your profile.
1
. (When set to Tuner ,
ENTER
En
Advertisement
Table of Contents
