Table of Contents
Advertisement
RT601HS_WV_EN.book 35 ページ ２００５年８月３日 水曜日 午後３時３１分
WV_EN.book 33 ページ ２００５年８月３日 水曜日 午後３時３１分
The example displays below show high-speed copying
from HDD to DVD, and HDD chase playback.
HDD
k 31 ページ ２００５年８月３日 水曜日 午後３時３１分
Playing CDs and WMA/MP3 discs
Remain 10h35m
Stop
he table below shows the basic playback controls for
1
udio CDs
, and WMA/MP3 files.
Press to start playback.
PLAY
２００５年８月３日 水曜日 午後３時３１分
g between TV and DVD
HDD
ecorder is stopped or recording you can
Press to stop playback.
STOP
Remain 10h35m
ether to have the audio/video from the built-in
Chase Play
Rec
external input) play on your TV ('DVD mode'),
e channel that the TV is currently set to ('TV
Pauses playback, or restarts playback
PAUSE
when paused.
８月３日 水曜日 午後３時３１分
buttons to change the program
back or when a menu is being displayed on-
Press to start scanning. Press again to
REV SCAN
FWD SCAN
sound and video is always routed to your TV
increase the scanning speed. (There are
fected by the TV/DVD mode setting.
two scan speeds; the current scan speed
he recorder must be connected to your TV
Stop display 1
is shown on-screen.)
ART cable to be able to use this feature.
GUIDE Plus+ setup
Press to skip to previous/next track (or
PREV
NEXT
1 2
folder for WMA/MP3 disc). (During play-
back you can also use the front panel +/–
TV/DVD
Stop
buttons.)
DVD-RW VR
Original
During playback, enter a track number
ur country,
The recorder takes a short while to set the time. After
then press ENTER to skip directly to that
Disc Name
you see that the time has been set, select Next to
track.
V/DVD to switch between TV mode and
proceed.
Press CLEAR to clear a number entry and
.
CLEAR
start again.
CLEAR
1
DVD-RW Original / Play List
ne, press the BLUE Action button
ENTER
If a VR mode disc is loaded, this shows whether playback
ayback
o the GUIDE Plus+ home screen.
is currently set to Original or Play List.
ed information on using the GUIDE
n shows you how to use your recorder for
During preview playback of the Copy List, this shows
he following chapter.
discs (DVD, CD, etc.), and for playback of
Copy List.
the HDD. More playback features, such as
program play, are covered in HDD and DVD
2
Disc type and mode
gs are already set to
page 61. VHS video playback is covered in
and sets the
Shows the disc type (HDD, DVD-R, DVD-RW, CD, etc.),
VHS, hard disk or DVD
up Navigator.
If the time could not be set automatically, press
ck and recording on page 71.
and the disc mode for recordable DVD, if applicable (VR
RETURN to go back to the previous screen and select
nd recording
lect Postal Code.
or Video).
Manual .
VD buttons (remote control and
3
Recording mode and time
•
Manual clock setting
o select the VHS video recorder,
Shows the current recording mode (XP, SP, LP, etc.), and
STANDBY / ON
DVD OPEN / CLOSE
If no stations in your area are broadcasting time
D for playback and recording. The
the total recording time of the disc.
signals, you can set the clock manually.
panel display shows which is
V
e VHS playback and recording on
4
Resume
Use the
nload all the
sing the built-in VCR.
Shows Resume if playback can be resumed from the last
You can set this by selecting a city or a time relative
place stopped.
to GMT.
5
Recording time remaining
Shows the approximate recording time left on the disc in
the current recording mode.
HS
HDD
DVD
6
Preset name and number
ing, or
Shows the preset name and preset number for the
n press
currently selected channel.
ENTER
buttons to enter your
Note
. If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
Press
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels
or 'Off' for summer time, then press ENTER.
irst HDD or DVD
on page 69).
PLAY
Select On if you are currently using summer time.
. When playing in PBC mode, some playback features, such as search, repeat and program play are not available. You can play a PBC Video
Rec Mode SP(2h00m/DVD)
DVD-RW Video
Hi-Speed Copy
Remain –h––m
Stop
0h08m left
Rec Mode SP(2h00m/DVD)
DVD-RW Video
Remain 0h52m
• Throughout this manual, the term 'DVD' means
Stop
Recording time
• Some DVD-Video discs don't allow certain playback
Relative playback position
1
Also turn on your TV and make sure that it is set to the
4
If you are using an external receiver (such as a
correct video input.
3
4
5
6
satellite receiver) with the supplied G-LINK cable,
complete this step, otherwise jump to step 5 below.
2
play a DVD.
Resume
If playing video from the HDD, skip to step 5 below.
XP (1h00m/DVD)
Rem. 0h35m
Finalized
3
: Comedy shows
4
Load a disc with the label side facing up, using the disc
9
10
tray guide to align the disc (if you're loading a double-
sided DVD-Video disc, load it with the side you want to
Initial Setup
Basic
Clock Setting
Auto Clock Setting
play face down).
Basic
Tuner
Input Line System
Date
SAT 01 / 0 1 / 2 005
• If you want to play a DTS audio CD, please first read
Video In/Out
Power Save
Time
1 1 : 20
Audio In
Auto Blank Cut
Audio Out
Indexed Copy
Clock Set CH
Language
Help Setting
5
Recording
Setup Navigator
Setup Navigator
Playback
• If you're playing a DVD-Video or Video CD, a disc
• See Connecting to a cable box, satellite receiver or
digital terrestrial receiver on page 17 for more on using
the supplied G-LINK cable.
• Select External Receiver 1 , 2 or 3 , then press
• When playing video from the HDD, playback will
ENTER . (If you have just one external receiver, use
External Receiver 1 . You can add further receivers in
• See the following sections for more details on playing
2 and 3 if you need to.)
buttons to set your time zone.
After pressing ENTER :
6
• Select your reception method ( Terrestrial , Cable or
1
If they aren't already on, switch on your TV and
Satellite ).
7
this recorder.
the disc and switch the recorder back into standby.
• Select your provider (if applicable).
STANDBY/ON to switch on.
Press
Initial Setup
• To open/close the disc tray, press
• Select the brand of your external receiver.
• Make sure that the video input on your TV is set to this
Basic
Basic
Clock Setting
Manual Clock Setting
Tuner
Input Line System
recorder.
• Identify which input your external receiver is
Time Zone
Video In/Out
Power Save
Audio In
Auto Blank Cut
connected to.
2
Press HDD to record to the HDD, or DVD to record
Audio Out
Indexed Copy
Summer Time
O ff
• Press
Language
Help Setting
After completing these steps the recorder will try and
to a recordable DVD.
Recording
Setup Navigator
Setup Navigator
communicate with your external receiver and change the
If you choose to record to the HDD, skip to step 5 now.
Playback
channel via the G-LINK cable. If the channel was
3
Press
OPEN/CLOSE to open the disc tray.
successfully changed, select Yes to confirm.
then use the
buttons to select 'On'
4
Load a blank DVD-R or DVD-RW disc with the
If the channel did not change, select No . The GUIDE
label side face-up, using the disc guide to align the
Plus+ system will try other codes assigned to your
7
Audio mode
Shows the broadcast audio mode for the current channel
preset (Mono, Stereo, etc.).
8
Copy control information
Shows recording restrictions of the current channel
program.
Playing Video CD/Super VCDs
The table below shows the basic playback controls for
9
Disc name
Video CD/Super VCDs.
Shows the disc name.
(For CDs, this area shows playable files other than CD
Some discs feature Playback Control (PBC for short)
audio tracks; for example, Multi-format: WMA/MP3.)
menus. These discs show PBC in the display when you
load them and display a menu on-screen from where you
10 Finalized
Important
can select what to watch.
Shows Finalized if a recordable DVD is finalized.
11 TV/DVD mode
Press to start playback.
PLAY
playback-only DVD-Video discs and DVD-R/RW. If a
Shows the current mode of the recorder (see Switching
Video CD only: If RESUME is displayed on-
function is specific to a particular kind of DVD disc, it
between TV and DVD on page 33).
screen, playback starts from the place last
is specified.
stopped.
Stop display 2
controls to operate at certain points in the disc. This
Press to stop playback.
STOP
STANDBY / ON
DVD OPEN / CLOSE
is not a malfunction.
Video CD only: You can resume playback
from the same point by pressing
Press
STANDBY/ON to switch on.
(Press
VHS
HDD
DVD
function.)
Stop
DVD-RW VR
7
8
Original
Pauses playback, or restarts playback
PAUSE
Press HDD to playback from the HDD, or DVD to
CH
when paused.
ABC Pr 1
Titles
Stereo
Lock Disc
Press to start scanning. Press repeatedly
Copy Once
REV SCAN
FWD SCAN
to increase the scanning speed.
Press
OPEN/CLOSE to open the disc tray.
1
Date and time
Load a disc.
DVD Mode
Press to skip to previous/next track.
PREV
NEXT
2
Number of titles/tracks on disc
When a PBC menu is displayed, press to
11
For a VR mode DVD-RW, the number of Original and Play
display the previous/next page. (During
List titles are shown separately.
playback you can also use the front panel
+/– buttons.)
Play display 1
During playback, enter a track number
PLAY
the note on page 35.
then press ENTER to skip directly to that
P r 1
PAUSE
STOP
S t art
track.
Press
PLAY to start playback.
N e x t
Press CLEAR to clear a number entry and
CLEAR
Play
start again.
menu may appear when you start playback. Use the
CLEAR
REC
STOP REC
DVD-R Video
While a PBC menu screen is displayed,
buttons and ENTER to navigate DVD disc
use to select numbered menu items.
ENTER
menus, and the number buttons and ENTER for
Video CD menus.
Video CD only: Each press skips backward/
CM
BACK
SKIP
forward progressively up to a maximum of
automatically stop after the end of a title is reached.
1
Number of chapters in title
ten minutes forward or three minutes
2
Current title and chapter number
back. Note that this function doesn't work
specific kinds of discs.
when playing in PBC mode.
(For CD/Video CD/Super VCD, shows current track; for
WMA/MP3, shows current folder and track; for JPEG
To stop playback, press
During playback, press to start slow-
STEP/SLOW
disc, shows current folder and file.)
motion playback. Press repeatedly to
When you've finished using the recorder, eject
3
Elapsed title time
change the playback speed (forward only).
(For CD, WMA, MP3, Super VCD, shows elapsed track
While paused, press to advance a single
1/2
time; for Video CD, shows elapsed disc time.)
frame (forward only).
Remove the disc before putting the recorder into
England
standby.
London
Press to display the disc menu of a Video
RETURN
STANDBY/ON to switch the recorder into
CD/Super VCD playing in PBC mode.
standby.
2
1 2
STOP again to cancel the resume
04
14:52 MON 15/11/2004
: Original 99
Play List 15
: On
1
2
3 4
3–2
0. 00. 15
Chapters 15
Title Total
0h11m 52s
STOP.
OPEN/CLOSE .
PLAY .
ABC Pr 1
Stereo
Copy Once
TV Mode
5
DVD Mode
En
Advertisement
Table of Contents
