Table of Contents
Advertisement
Using the GUIDE Plus+® electronic program guide
05
Setting a VIDEO Plus+
1
Select 'Schedule' from the Menu bar.
2
Press the RED Action button (VIDEO Plus+).
3
Use the number buttons to enter a PlusCode
programming number.
• If you live in an area not yet covered by the GUIDE
Plus+ system you may also have to input a channel
number. Follow the on-screen display to do this.
4
Press
ENTER
*
VIDEO Plus+ and PlusCode are trademarks of Gemstar
Development Corporation.
The VIDEO Plus+ system is manufactured under license
from Gemstar Development Corporation.
46
En
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
®
* recording
PlusCode programming number and press
to confirm.
Setting a manual recording
1
Select 'Schedule' from the Menu bar.
2
Press the GREEN Action button (Manual).
3
Use the number and
the recording date, then press the GREEN Action
button (Next).
4
In the same way, enter the recording start time,
followed by the GREEN Action button (Next) to
confirm.
5
Enter the recording end time in the same way,
followed by the GREEN Action button (Next) to
confirm.
buttons to enter
Advertisement
Table of Contents
