Related Manuals for J-Power Nano Warbirds P-47
Summary of Contents for J-Power Nano Warbirds P-47
- Page 1 Assembly and Operating Manual Nano Warbirds P‐47 Specification: *Length: 19‐1/10"(485mm) *Wing Span: 21‐7/10"(550mm) *Flying Weight: 6 oz (175g)
-
Page 2: Nano Warbirds P
Assembly and Operating Manual Nano warbirds p-47 Dear customer, For this model you require a radio control system Kit contents Congratulations on your choice of a with at least four channels. We particularly Fuselage, complete with motor, speed controller factory-assembled model aircraft from the jpower recommend 2.4 GHz systems. - Page 3 Assembly and Operating Manual Nano warbirds p-47 Fig. 1 - Glue the control rod to Horizontal tail. (glue not included) Fig. 2 - Remove any excess glue and hold in position until glue sets. The photo shows the finished view.
-
Page 4: Remove Any Excess Glue And Hold In Position Until
Assembly and Operating Manual Nano warbirds p-47 Fig. 5 - Glue the control rod to wing set. (glue not included) Fig. 6 - Remove any excess glue and hold in position until glue sets. The photo shows the finished view. -
Page 5: Shows The Finished View
Assembly and Operating Manual Nano warbirds p-47 Fig. 9 - Apply glue to the horizon tail (glue not included) Fig. 10 - Remove any excess glue and hold in position until glue sets. Figs. 11 - Photo shows the finished view. - Page 6 Assembly and Operating Manual Nano warbirds p-47 Figs. 13 - Apply glue to the fuselage (glue not included) Figs. 14 - Assemble the horizon tail and vertical tail to fuselage Figs. 15 - Photo shows the finished view. Figs. 16...
- Page 7 Assembly and Operating Manual Nano warbirds p-47 Figs. 17 - Tighten the control rod with screw. Figs. 18 - Connect the control rod to the horizon tail. Figs. 19 - Tighten the control rod with screw. Figs. 20 - Connect the wing panel push rod to the servo arm...
- Page 8 Assembly and Operating Manual Nano warbirds p-47 Figs. 21 - Assemble the elevator push rod to the wing set. Figs. 22 - Tighten the elevator push rod with screw. Figs. 23 - The photo shows the finished view. Figs. 24 - Reverse the procedure to the left wing.
- Page 9 Assembly and Operating Manual Nano warbirds p-47 Figs. 25 - Apply glue to the scatter-gun. Figs. 26 - Apply glue to the wing panel. Figs. 27 - Assemble the scatter-gun to the wing panel ,photo shows the finished view. Figs. 28 - Reverse the procedure to the left wing.
-
Page 10: Figs
Assembly and Operating Manual Nano warbirds p-47 Figs. 29 - Apply glue to the single scatter-gun. Figs. 30 - Apply glue to the wing panel. Figs. 31 - Assemble the single scatter-gun to the wing panel, photo shows the finished view. - Page 11 Assembly and Operating Manual Nano warbirds p-47 Figs. 33 - Assemble the antenna to the fuselage. Figs. 34 - Photo shows the finished view. Figs. 35 - Apply glue to the radiator. Figs. 36 - Assemble the radiator to fuselage.
- Page 12 Assembly and Operating Manual Nano warbirds p-47 Figs. 37 - Photo shows the finished view. Figs. 38 - Reverse the procedure to the right side. The photo shows the finished view. Figs. 39 - Assemble the main wing to the fuselage. Photo shows the finished view .
- Page 13 Assembly and Operating Manual Nano warbirds p-47 Figs. 41 - Apply glue to the fuel tank. Figs. 42 - Apply glue to fuselage. Figs. 43 - Assemble the fuel tank to fuselage ,photo shows the finished view. Figs. 44 - Apply glue to missile...
- Page 14 Assembly and Operating Manual Nano warbirds p-47 Figs. 45 - Apply glue to wing set. Figs. 46 - Assemble the missile to wing set ,photo shows the finished view . Figs. 47 - Reverse the procedure to the right side. The photo shows the finished view.
- Page 15 Assembly and Operating Manual Nano warbirds p-47 - Fix the main landing gear with screw. Figs. 49 - Photo shows the finished view. Figs. 50 - Reverse the procedure to the left side. The photo shows the finished view. Figs. 51 - Photo shows the finished view.
- Page 16 Assembly and Operating Manual Nano warbirds p-47 Figs. 53 - Apply glue to the fuselage. Figs. 54 - Assemble the nose cone to fuselage, photo shows the finished view. Figs. 55 - Assemble the propeller to motor. Figs. 56 - Fix the propeller with screw.
- Page 17 Assembly and Operating Manual Nano warbirds p-47 Figs. 57 - Connect to the receiver and place the receiver in the middle of the fuselage. Figs. 58 - Photo shows battery leads connected to the speed controller. Figs. 59 - Place the flight battery in the fuselage.
- Page 18 Assembly and Operating Manual Nano warbirds p-47 - Reverse the procedure to replace the canopy. Figs. 61 - Place the battery in the model of balancing; do not connect it. - Make the Centre of Gravity on both sides. - Support the model at the marked C.G. and allow it to hang freely.
- Page 19 Assembly and Operating Manual Nano warbirds p-47 Fig. 64 - Switch the transmitter on, and move the throttle stick to the “Motor OFF” position. (Diagram MODE 1 right throttle control stick) Fig. 65and 66 - Check the channel assignment of the control surfaces, and swap over the connectors at the - Check the neutral position of the control surfaces.
- Page 20 Assembly and Operating Manual Nano warbirds p-47 the aileron and elevator functions Fig. 67 checking the electric power system - Caution: position the throttle stick in such a way that the motor cannot possibly start running...
- Page 21 Assembly and Operating Manual Nano warbirds p-47 - Switch the transmitter on, and connect the Read the sections in the Safety Notes entitled aeroplane a firm launch directly into any breeze, flight pack “Routine pre-flight checks” and “Flying the with the fuselage and wings level.
- Page 22 Assembly and Operating Manual J-POWER GROUP CO.,LTD 5th Floor, A3 Building, Xinjianxing Technology Industrial Park, Fengxin Road, Guangming Town, Bao'an, Shenzhen City, 518107 China Phone: +86 755 33699201 Fax: +86 755 33699203 www.jpower.hk...