Related Manuals for J-Power Explorer EDF
Summary of Contents for J-Power Explorer EDF
- Page 1 Assembly and Operating Manual Explorer EDF Specification: *Length: 30‐1/10"(765MM） ...
- Page 2 J-POWER and thank you for placing your trust in unit included with our deluxe version. Kit contents The power for the receiver is drawn from the...
- Page 3 Assembly and Operating Manual Explorer EDF Fig. 1 -Assemble the V-tail Fig. 2 -Install V-tail on fuselage, Fig. 3 - Photo shows the finished view . Fig. 4 -Lock the V-tail with screws ..
- Page 4 Assembly and Operating Manual Explorer EDF Fig. 5 - Connect the control rods and control horns .. Fig. 6 - Photo shows the finished view . Fig. 7 - Assemble the control rods to the servo .and connect the rods with servo arms and control horns.
- Page 5 Assembly and Operating Manual Explorer EDF Fig. 9 -Photo shows the cover on the servo . Fig. 10 - Install the wing support bar into the main wings . Fig.11 -Lock the main wings with screws . Fig. 12 - Connect the channel wire leads to the receiver...
- Page 6 Assembly and Operating Manual Explorer EDF Fig. 13 - located the battery Fig. 14 - Connect the battery and ESC Fig. 15 - Congratulations, have completed assembly process. We hope you enjoy flying your new model! Fig. 16 Photo shows the balancing weight.
- Page 7 Assembly and Operating Manual Explorer EDF Fig. 17 Charge the flight battery; connect the Equalizer lead using and adapter lead matching your charger (adapter lead not included). -Controller and then switch the transmitter off. Fig. 18 - Switch the transmitter on, and move the throttle stick to the “Motor OFF”...
- Page 8 Assembly and Operating Manual Explorer EDF Fig. 19 Function test - Check the channel assignment at the receiver, and if necessary swap the plugs as necessary. - Set the transmitter sticks and trims to centre. - The control surfaces should now also be at centre (neutral).
- Page 9 Read the sections in the Safety - Check the direction of rotation of the motor: - Allow the Explorer EDF to fly straight ahead Notes entitled “Routine pre-flight when viewed from the front, the output shaft initially;...
- Page 10 J-POWER GROUP CO.,LTD 5th Floor, A3 Building, Xinjianxing Technology Industrial Park, Fengxin Road, Guangming Town, Bao'an, Shenzhen City, 518107 China Phone: +86 755 33699201 Fax: +86 755 33699203 www.jpower.hk...