Connection To Pc - Philips 170S5FG/00 Service Manual

Connecting to Your PC
1) Plug the power cord into monitor firmly
2) Clip the power cord and signal cable together
for cable management

Connection to PC

Note: If you use an Apple Macintosh, you need to connect the
Special Mac adapter to one end of the monitor signal cable
3) Connect to your PC
(A) Turn off your computer and unplug its power cable.
(B) Connect the monitor signal cable to the video connector on
the back of your computer.
(C) Plug the power cord of your computer and your monitor into
a nearby outlet
(D) Turn on your computer and monitor. If the monitor displays
An image, installation is complete.
170S5 LCD
5
Go to cover page