38
Installing an expansion card
This section explains how to install an expansion card.
I/O interface
The GT110 has two PCI Express
•
One PCI Express
•
One PCI Express
•
Two PCI (32-bit / 5 V) slots
To install an expansion card:
1
Perform the pre-installation instructions described on page 22.
2
Remove the side panel described on page 24.
3
If necessary, remove any cables that prevent access to the PCI slot.
4
Locate an empty expansion slot that is compatible with the
specification of the card you intend to install.
5
Install the expansion card.
®
and two PCI expansion slots:
®
x8 slot (x8 bandwidth)
®
x8 slot (x4 bandwidth)
3 System upgrades