•
Check that relevant switches and jumpers on the hard drive and on the
backplane board (for hot-swappable HDD) are set correctly.
DVD drive activity indicator does not light.
Do the following:
•
Make sure the SATA and power cables are properly connected.
•
Check that relevant switches and jumpers on the drive are set
correctly.
•
Check that the drive is properly configured.
DVD tray cannot be ejected.
Insert the tip of a paperclip into the small hole on the DVD drive. Slowly pull
the tray out from the drive until the tray is fully extended.
DVD drive cannot read a disc.
Do the following:
•
Make sure you are using the correct type of disc.
•
Make sure the disc is properly seated in the drive.
•
Make sure the disc is unscratched and free of any contaminants.
•
Make sure the drive's cables are properly connected.
Newly installed memory modules are not detected.
Do the following:
•
Make sure the memory modules specifications comply with the system
requirements.
•
Make sure the memory modules have been populated according to the
system guidelines.
•
Make sure the memory modules are properly installed on their
mainboard slots.
Network connection indicators do not light.
Do the following:
•
Check the cabling and network equipment to make sure that they are
in proper condition.
•
Reinstall the network drivers.
71