Gateway GT110 Series User Manual page 46

32
(3) Engage the load lever back into place.
8 Apply the thermal interface material.
(1) Use an alcohol pad to wipe off the old thermal grease from both
the HSF assembly and the processor socket retention plate.
(2) Apply a thin layer of thermal interface material before installing the
HSF.
Make sure that only a very thin layer is applied so that both
contact surfaces are still visible.
9 Reinstall the HSF assembly.
(1) Align then insert the HSF on top of the retention plate.
(2) Use a long-nosed screwdriver to tighten the four HSF mounting
pins to secure the assembly.
3 System upgrades