3. Disassembly and Reassembly
3-7 Removing Convection Element, Fan-Covnection and Motor-Convection
Parts
Convection
Element, Fan-
Convection ,
Motor-Convection
CAUTION
Be careful not to bend the Fan-Convection(Blade)
Explaination Photo
1. Disconnect power and remove oven racks .
2.
3. Remove Cover-Back Main Wire from the unit .
4. Remove oven door . (See Page 24 on page for procedure)
5. Remove the Cover-Casing .
6.
7. Unscrew 9 points and disconnect a Motor-Convection
Explaination
Pull the range out of its mounting location so that you can
access the rear of the unit .
(See step 3 on page 11 for procedure)
Unscrew nut of Fan-Convection Main(CW), and 2 Fan-
Convection Planets(CCW) .
wire and disconnect Heater-Convection wire .
19