Table of Contents
Advertisement
3-15 Replacement of Motor Convection
The Assembly is reverse order of disjointing.
Parts
Motor
Convection
Upper
Lower
Nut-Hexagon cap
Explaination Photo
Upper
Lower
Fan-Convection
- 21 -
1. Seperate the 1 tube from the
adiabatic rear.
*
Be sure to connect tube again
when assembly.
2. Remove 5 screws at the back
inside cavity to separate the cover
casing.
3. Turn flange nut to the left to
release and separate spacer fan
convection and fan convection.
4. Remove two connector from
convection motor
5. Remove turn toward the counter-
clockwise to separate.
Convection fan is turn in the
opposite direction each other for
improvement cook performance.
Upper fan is turn in counter-
clockwise direction, Lower fan
is fan turn in clockwise direction
therefor convection fan direction
and netflange are opposited each
other.
Convection fan is indicated
(U),(L) and netflange is different
the head shape.
Main Blade
E-ring
Cavity
Nut-Hexagon cap
Explaination
Reference
Motor
Convection
Advertisement
Table of Contents
