Advertisement
Quick Links
T
ECHNICAL INFORMATION
For Models
Description
C
ONCEPTION AND MAIN APPLICATIONS
Model 2106 is a portable band saw suitable for cutting pipe and light
weight steel, etc.,
and it's belief benefits are:
Light weight and wide range of cutting capacities from 115mm to large
diameter material.
S
pecifications
Voltage (V)
100
115
200
220
230
240
(Note) Model with 115V, 6.5/4.5A, 710/490W (high/low) is planed to be shipped for North America and Canada.
No load speed
Driving shank (LxWxH)
Max. cutting capacity
Net weight
Power supply cord
S
tandard equipment
Band saw blade13-1140(SK, 18 teeth/inch)
Set accessories (Triangle scale, hex. Wrench-4, hex. Wrench-5)
Wax
O
ptional accesories
Band saw blade 13-1140 (SK 14, 18, 24 teeth/inch, SKH 14, 18, 24 teech/inch)
Portable band saw stand (chain vice type)
F
eatures and benefits
1. Wide range of cutting capacity up to 4 inch pipe (outer diameter 115mm)
2. 5.5kg light weight improves workability.
3. Speed can be changed by two steps and peripheral velocity is variable depending on material.
4. Tension load to the blade can be easily set by the lever and the blade will be replaced quickly.
5. Large front grip and comfortable handle shape improve operability. Cab-tire cord is coming out from the side so as not
to disturb workability.
6. Optional stand enables the machine to be fixed.
2106
Portable Band Saw
Current(A)
Cycle(Hz)
7.5
50/60
6.5
50/60
50/60
3.8
50/60
3.4
3.3
50/60
3.1
50/60
Blade peripheral velocity; 80m/min. at high, 60m/min. at low speed
Band saw blade 1140L x 13W x 0.5D (mm)
Round material; 115mm,
Square material; 115x115mm
(75x110mm when stand is used.)
5.5kg (12.1lbs)
2.5m (8.2ft)
Continuous Rating
Input(W)
Output(W)
710
430
710
430
710
430
710
430
710
430
710
430
New Tool
Max. output(W)
800
800
800
800
800
800
Advertisement
Related Manuals for Makita 2106
Summary of Contents for Makita 2106
- Page 1 Description Portable Band Saw ONCEPTION AND MAIN APPLICATIONS Model 2106 is a portable band saw suitable for cutting pipe and light weight steel, etc., and it's belief benefits are: Light weight and wide range of cutting capacities from 115mm to large diameter material.
- Page 2 Heavy cutting (pressing material when stand is used) Normal cutting (material's own weight when stand is used) Peripheral Model & blade velocity Load current (A) Cutting speed (min) Load current (A) Cutting speed (min) 3.4~3.9 4.2~4.9 2106 4.0~4.5 4.5~5.5 3.5~4.0 3.8~4.5 18 teeth 4.2~4.6 4.2~5.0 3.0~3.2 4.3~4.7...
- Page 3 Durability of saw blade Cutting with material's own weight by using a stand Durability Stainless steel pipe (SUS304, external dia. 60.5mm, 3mm thick) Steel pipe (STKM 13A, external dia. 50.8mm, 3.5mm thick), load 3.2 to 3.5A Broken Saw blade SK18 teeth/inch is used. Number of cutting times (with one blade) The blade has the same durability as Milwaukee's.
- Page 4 epair 1. Replacement of armature (1) Remove carbon brush, four hex. socket bolts that secures motor housing, and two pan-head screw that fixes handle on the frame. (2) Remove motor housing together with handle from the gear housing, and armature can be removed. (3) Assemble with a reverse order of disassembly.
- Page 5 4. Replacement of rubber tire and wheel complete Hex. socket bolt M6x12 (1) Pull out wheel complete by removing hex. socket bolt that secures the wheel complete. Flat washer 16 (2) Check that there is no abnormalities in the gear Wheel complete section of the wheel complete on the drive side.
-
Page 6: Wiring Diagram
iring diagram General specification: Wirings of field lead wires are defferent depending on types of voltage. Colors of lead wires are all the same. a) Single pole switch Gray High-low speed selector switch Connector Black terminal Orange Blue Main Power supply cord switch To field steel plate Capacitor... -
Page 7: Optional Accessories
(Notice) 1. Layout of main switch, capacitor and line coil is defferent depending on specifications for each country. 2. When fasten-receptacle is mounted on high-low speed selector switch, fasten-receptacle sleeve should incline inward as shown in the figure. (Direction is not specified to center two pieces.) High-low speed selector switch Fasten receptacle...