Ikan MS1 Quick Start Manual page 7

7. Shooting Angle Range
Roll: 45°± 45°
Tilt: 45°, 90°
The following angles are not possible.
8. Attention
A. If the stabilizer needs to be calibrated, place the MS1 on a flat surface. Make sure
the camera is balanced on the gimbal. Press and hold the joystick button for 3
seconds. If balance is not attained, repeat the calibration steps.
B. USB Ports:
The USB located on the handle is a 5v / 0.5A power output.
The Micro USB located on the handle is for remote control.
The Mini USB located on the gimbal is for accessing the 8-Bit board PID
settings through Simple BGC 8-Bit 2.40b7.
Beholder® is the licensed trademark of TRD Beholder.
Page 6