ADTRAN netvanta 1230 series User Manual page 4

C Y
ONFIGURE OUR
The applications you will need to configure vary by product and by network. Review the list of
defaults for your unit before deciding what applications to configure. The following are some
common applications that should be configured on startup. These are all available on ADTRAN's
Knowledge Base at http://kb.adtran.com.
Configuring Layer 3 Switching in AOS
(article 3070)
Configuring Hardware ACLs in AOS
(article 3088)
Configuring DoS Protection in AOS
(article 3113)
Configuring Ethernet Switch QoS and CoS
in AOS (article 1489)
Configuring DHCP Server in AOS
(article 2149)
Important: For additional details on product features, specifications,
installation, and safety, refer to
Switch Hardware Installation Guide
article 2517) online at http://kb.adtran.com.
Feature
IP Address
User Name
Password
HTTP Server
Event History
IP Routing
R F
ESTORING ACTORY
On units that have a console port, you cannot restore the factory defaults, but must rather erase
the device's configuration and then reconfigure the unit to operate correctly for your network. To
erase the unit's current configuration, follow these steps:
1. Access the unit's CLI and enter enable at the > prompt.
2. Enter erase startup-config at the # prompt. The device will have a blank configuration upon
reboot.
3. Enter reload at the # prompt to begin restarting the device. When prompted to save
configuration, enter no. When prompted to reboot, enter yes.
4. Upon reboot, you will have to reconfigure the unit using the CONSOLE port. Follow the
steps outlined here or in the technical note,
Knowledge Base article 1788).
4
A
PPLICATION
Understanding PoE and Power Management in AOS
D
EFAULTS
Copyright © 2011 ADTRAN, Inc. All Rights Reserved.
Configuring a Port Scheduler in AOS
(article 3054)
Configuring Port Mirroring in AOS
(article 2180)
Enabling Persistent Debug Logging in AOS
(article 2623)
(article 2522)
NetVanta 1230 Series Fast Ethernet
(ADTRAN's Knowledge Base
Default Value
10.10.10.1
admin
password
Enabled
On
Enabled
Accessing the Web Interface in AOS (ADTRAN's