Playing Discs - Sony DVP-C660 Service Ma

QQ
3 7 63 1515 0

Playing Discs

This chapter describes how to play a
DVD/CD/VIDEO CD.
TE
L 13942296513
16
Playing at Various Speeds/Frame by Frame
Z
Using the click shuttle and the JOG button/indicator, you
can play back a DVD/CD/VIDEO CD at various speeds
or frame by frame. Each time you press JOG, it changes
between shuttle mode and jog mode.
1 2 3
4 5 6
7 8 9
0
JOG
Click shuttle
To change the playback speed
(Shuttle mode)
Turn the click shuttle. The playback speed changes
depending on the turning direction and angle as follows:
When you play back a DVD
During playback
FF2M Fast forward (about 30 times the normal speed)
Y
FF1M Fast forward (about 10 times the normal speed)
Y
×2B (about twice the normal speed)
Y
PLAYN (normal speed)
Y
×2b (about twice the normal speed)
Y
FR1m Fast rewind (about 10 times the normal speed)
Y
www
FR2m Fast rewind (about 30 times the normal speed)
If you turn the click shuttle quickly, the playback speed
goes to FF2M or FR2m at once.
.
18
http://www.xiaoyu163.com
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted. Refer to the
instructions supplied with your disc.
!
Power indicator H A
Adjust the headphone volume. DISC SKIP
Connect headphones*.
@/1
1 2 3
4 5 6
7 8 9
0
* For details on using the VIRTUAL SURROUND
HEADPHONES function, see "Digital Cinema Sound Settings"
on page 39.
1
Turn on your TV.
Turn on the TV and select the video input so that you
can view the pictures from this player.
When using a receiver (amplifier)
Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.
2
Press ! to turn on the player.
The player enters standby mode and the power
indicator lights up in red.
3
Press A on the player, and place a disc on the disc
tray.
To place other discs on the tray, press DISC SKIP on
the player and place the discs in the order you want to
play them.
Each time you press DISC SKIP, the disc tray turns so
you can place the discs in the empty compartments.
The player plays from the last disc placed on the tray.
With the playback Disc tray number
side facing down
4
Press H.
The disc tray closes and the player starts playback of
all discs (continuous play). Adjust the volume on the
TV or the receiver (amplifier).
During pause
SLOW1 Slow (playback direction)
Y
SLOW2 Slow (playback direction – slower than
"SLOW1 ")
Y
PAUSEX Pause
Y
SLOW2 Slow (opposite direction – slower than
"SLOW1 ")
Y
SLOW1 Slow (opposite direction)
When you play back a CD/VIDEO CD
During playback
FF2M Fast forward (faster than "FF1M")
Y
FF1M Fast forward
Y
×2B (about twice the normal speed)*
Y
PLAYN (normal speed)
Y
FR1m Fast rewind
Y
FR2m Fast rewind(faster than "FR1m")
* CD Only
If you turn the click shuttle quickly, the playback speed goes
to FF2M or FR2m at once.
During pause (VIDEO CD only)
SLOW1 Slow (playback direction)
Y
SLOW2 Slow (playback direction – slower than
"SLOW1 ")
Y
PAUSEX Pause
To return to continuous play
Press H.
Note
Depending on the DVD/VIDEO CD, you may not be able to do
some of the operations described.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
After following Step 4
xWhen playing a DVD
A DVD menu or title menu may appear on the TV
screen (see page 21).
xWhen playing a VIDEO CD
Depending on the VIDEO CD, a menu may appear on
the TV screen. You can play the disc interactively by
following the instructions on the menu. (PBC Playback,
see page 21.)
To turn on the player
Press ! on the player. The player enters standby mode
and the power indicator lights up in red.
Then press @/1 on the remote. The player turns on and
the power indicator lights up in green. In standby mode,
the player also turns on by pressing A on the player or by
pressing H.
To turn off the player
Press @/1 on the remote. The player enters standby mode
and the power indicator lights up in red.
To disconnect the power of the player, press ! on the
player.
Notes on playing DTS sound tracks on a CD
• Do not play DTS sound tracks without first connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO
SETUP" is set to "D-PCM" in the setup display, and may affect
your ears or cause your speakers to be damaged.
• Set the sound to "STEREO" when you play DTS sound tracks
on a CD. (See "Changing the Sound" on page 35.) If you set
the sound to "1/L" or "2/R", no sound will come from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
• If you play a CD with a DTS sound track, a loud noise may
come out from the AUDIO OUT connectors, affecting your ears
or causing the speakers to be damaged.
Notes
• If you leave the player or the remote in pause or stop mode for
15 minutes, the screen saver image appears automatically. It
will also appear if you play back a CD for more than 15
minutes. To make the screen saver image go away, press H.
(If you want to set the screen saver function to off, see page 60.)
• While playing a disc, do not turn off the player by pressing !.
Doing so may cancel the settings of the menu. When you turn
off the player, press x first to stop playback and then press @/1
on the remote. After the power indicator lights up in red and
the player enters standby mode, press ! on the player.
Q Q
3 6 7 1 3 1 5
To play the disc frame by frame
(Jog mode)
1
Press JOG.
JOG lights up during jog mode.
2
Turn the click shuttle.
Depending on the turning speed, playback goes to
frame-by-frame playback in the direction that the click
shuttle is turned. If you turn the click shuttle at a
constant speed for a while, the playback speed goes to
slow or normal.
To return to Continuous Play
Press H.
Note
If you don't operate the click shuttle for about 20 seconds after
pressing JOG, it returns to shuttle mode.
co
.
1-4
9 4 2 8
Additional operations
./> A
DISC SELECT 1 – 5
H
X x
DISC SKIP
Z
1 2 3
4 5 6
7 8 9
0
DISC 1 – 5
./>
H x
X
T o
Operation
Select a disc Press DISC SELECT 1 – 5 on the
player or DISC 1 – 5 on the remote
Stop
Press x
Pause
Press X
Resume play after pause
Press X or H
Go to the next disc
Press DISC SKIP on the player
Go to the next chapter,
Press >
track or scene in
continuous play mode
Go back to the preceding
Press .
chapter, track or scene in
continuous play mode
Stop play and remove the
Press Z
disc
You can play discs in various modes such as Program Play
using the on-screen menu (Control Menu). For Control
Menu operations, see page 28.
0 5 8 2 9 9 4 2 8
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play)
The player remembers the point where you stopped the
disc, and when "RESUME" appears on the front panel
display, you can resume playback from that point.
As long as you do not open the disc tray, Resume Play
will work even if the player enters standby mode by
pressing @/1 on the remote.
H x
H
x
1
While playing a disc, press x to stop playback.
"RESUME" appears on the front panel display and
"Disc will restart from current point. To start from
beginning, press [STOP] again." appears on the TV
screen.
If "RESUME" does not appear, Resume Play is not
available.
2
Press H.
The player starts playback from the point where you
stopped the disc in Step 1.
z
m
To play from the beginning of the disc
When the playing time appears on the front panel display before
you start playing, press x to reset the playing time, then press
H.
9 9
9 9
17
19