Checking The Playing Time And Remaining Time; Changing The Sound - Sony DVP-C660 Service Ma

QQ
3 7 63 1515 0
Searching for a Disc/Title/Chapter/Track/
Index/Scene
2
Press , or ENTER.
" " changes to "— — ".
2
PLAY
1 2 ( 2 7 )
DVD
– – ( 3 4 )
C 0 1 : 3 2 : 5 5
CHAPTER
Number buttons ENTER Cancel: RETURN
3
Select the number of the disc, title, chapter, track,
index or scene you want to search for using the
number buttons, then press ENTER.
The player starts playback at the selected number.
To cancel the number, press CLEAR before pressing
ENTER.
To cancel while making a selection
Press ORETURN.
z
You can select a disc directly
Press DISC SELECT 1 – 5 on the player or DISC 1 – 5 on the
remote.
Notes
• The title, chapter or track number displayed is the same
number recorded on the disc.
• The index numbers are not displayed during PBC playback of
VIDEO CDs.
TE
L 13942296513
32
Labeling the Disc Z
You can label discs so that the label appears on your TV
screen and the front panel display when you play the disc.
If the disc already has DVD TEXT or CD TEXT recorded
on it, then this information will appear instead.
Press DISPLAY. "TIME/MEMO" appears. Press TIME/
TEXT on the remote until the Disc Memo appears at the
bottom of the display. If the disc does not contain a label,
"NO TEXT" is displayed. Follow the steps below to label
a disc.
If the disc has DVD TEXT or CD TEXT already recorded
on it, "TIME/TEXT" appears instead. Press TIME/TEXT
on the remote until the information is displayed at the
bottom of the display. You cannot change this information.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Disc Memo or BRAHMS SYMPHONY NO – 4
DVD/CD TEXT
z
You can select "TIME/MEMO" or "TIME/TEXT" directly
Press TIME/TEXT on the remote. To display DVD/CD TEXT or
Disc Memo, press TIME/TEXT until DVD/CD TEXT or Disc
Memo is displayed.
z
You can view the entire DVD/CD TEXT or Disc Memo recorded
on the disc
DVD/CD TEXT or Disc Memo is scrolled on the front panel
display.
Note
This player can only display the first level of DVD/CD TEXT
information.
Labeling discs (Disc Memo)
When DVD TEXT or CD TEXT is not recorded on the disc,
www
you can put a personal title on the disc by labeling it on
the on-screen display. You can input up to 20 characters
per disc.
You can also have the player display the Disc Memo each
time you select the disc. The Disc Memo can be anything
you like, such as a title, musician's name, category or date
of purchase.
.
34
http://www.xiaoyu163.com
Checking the Playing Time
and Remaining Time
Z
You can check the playing time and remaining time of the
current title, chapter or track and the total playing time or
remaining time of the disc.
Press DISPLAY. Then press TIME/TEXT on the remote to
change the time information.
You can also check the DVD TEXT, CD TEXT or Disc
Memo, and label the disc. See page 34.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Select: ENTER
When playing a DVD
x TIME/MEMO or TIME/TEXT
• C : Playing time of the current chapter
• C – : Remaining time of the current
chapter
• T : Playing time of the current title
• T – : Remaining time of the current title
When playing a VIDEO CD (during PBC playback)
x TIME/MEMO
• : Playing time of the current scene
When playing a VIDEO CD (in continuous play) or
CD
x TIME/MEMO or TIME/TEXT
• T : Playing time of the current track
• T – : Remaining time of the current track
• D : Playing time of the current disc
• D – : Remaining time of the current disc
z
You can select "TIME/MEMO" or "TIME/TEXT" directly
Press TIME/TEXT on the remote. Each time you press the
button, the time information changes.
1
Select the disc you want to label.
2
Select "TIME/MEMO" and press ENTER.
"DISC MEMO INPUT," appears.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
T – – : – – : – –
DISC MEMO INPUT
TIME/MEMO
Number buttons Cancel:
ENTER RETURN
3
Select "DISC MEMO INPUT," and press ENTER.
The DISC MEMO INPUT display appears.
C 0 1 : 3 2 : 5 5
DISC MEMO INPUT
ABCDEFGHIJKLMNOPQRSTUVWX
YZ 0123456789<>+ – /=? _ @
/
SAVE
Select: ENTER
Save: SAVE ENTER Cancel: RETURN
4
Select a character by pressing </M/m/, or by
turning the click shuttle on the remote.
The selected character changes color.
C 0 1 : 3 2 : 5 5
DISC MEMO INPUT
B
ABCDEFGHIJKLMNOPQRSTUVWX
YZ 0123456789<>+ – /=? _ @
/
SAVE
Select:
ENTER
Save: Cancel:
SAVE ENTER RETURN
5
Press ENTER.
C 0 1 : 3 2 : 5 5
DISC MEMO INPUT
BRAHMS
ABCDEFGHIJKLMNOPQRSTUVWX
YZ 0123456789<>+ – /=? _ @
/
SAVE
x ao u163
y
Select:
ENTER
Save: Cancel:
SAVE ENTER RETURN
i
http://www.xiaoyu163.com
2 9
8
Selecting a Starting Point Using the Time Code Z
You can search for a starting point by inputting the time
code.
Select "TIME/MEMO" or "TIME/TEXT" after pressing
DISPLAY.
The time code corresponds to the approximate actual
playing time. For example, to search for a scene 2 hours 10
minutes 20 seconds past the beginning, input 2:10:20.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Select:
ENTER
1
Select "C " (playing time of the
current chapter) when playing a DVD.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Select:
ENTER
2
Press , or ENTER.
Time code changes to "T – – : – – : – –".
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
T – – : – – : – –
DISC MEMO INPUT
TIME/MEMO
Number buttons Cancel:
ENTER RETURN
Q Q
3 6 7 1 3 1 5
6
Repeat Steps 4 and 5 to input other characters.
7
When you have entered all the characters for the
Disc Memo, select [SAVE] by pressing </M/m/,
and then press ENTER.
The Disc Memo is stored.
1
PLAY
1 2 ( 2 7 )
DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Disc Memo or BRAHMS SYMPHONY NO – 4
DVD/CD TEXT
To correct the characters
• To erase the characters:
1 Move the cursor to the character you want to erase
by pressing . or >.
2 Press CLEAR.
• To insert or overwrite the characters:
1 Move the cursor to the character you want to correct
by pressing . or >.
2 Select the correct character by pressing </M/m/,
or by turning the click shuttle on the remote.
3 To insert the character, press ENTER.
To overwrite, don't press ENTER but move the
cursor by pressing . or >.
z
You can save the Disc Memo using the remote
After you have entered the characters, press INPUT on the
remote to store the Disc Memo.
z
You can display the Disc Memo input display using the
remote
Press INPUT on the remote.
Notes
• Do not turn off the player by pressing !. Doing so may cancel
the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.
co
• You can label up to 300 discs. When you have the player store
over 300 discs in memory, each new Disc Memo erases the
oldest Disc Memo from those first stored.
.
1-8
9 4 2 8
3
Input the time code using the number buttons,
then press ENTER.
The player starts playback at the selected time code.
To cancel the number, press CLEAR before pressing
ENTER.
To cancel while making a selection
Press ORETURN.
Note
When you input the time code, input the playing time of the title,
not the chapter or track time.
0 5 8 2 9 9 4 2 8

Changing the Sound

If the DVD is recorded with multilingual tracks, you can
select the language you want while playing the DVD.
If the DVD is recorded in multiple audio formats (PCM,
Dolby Digital or DTS), you can select the audio format
you want while playing the DVD.
With multiplex CDs or VIDEO CDs, you can select the
sound from the right or left channel and listen to the
sound of the selected channel through both the right and
left speakers. In this case, the sound loses its stereo effect.
For example, with a disc containing a song, the right
channel may output the vocals and the left channel may
output the instrumental. If you only want to hear the
instrumental, you can select the left channel and hear it
from both speakers.
Select "AUDIO" after pressing DISPLAY.
1 PLAY
1 2 ( 2 7 ) DVD
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
1: ENGLISH PROGRAM FORMAT
1: ENGLISH DOLBY DIGITAL 3/2.1
2: ENGLISH
3: FRENCH L C R
LFE
LS RS
AUDIO
Select: ENTER Cancel: RETURN
x AUDIO
When playing a DVD
Select the language. The languages you can select are
different depending on the DVD. When 4 digits are
displayed, they represent the language code. Select the
language code from the list on page 81.
When the same language is displayed two or more times,
the DVD is recorded in multiple audio formats. The
current audio format is shown on the "PROGRAM
FORMAT" display.
When playing a VIDEO CD or a CD
m
The default setting is underlined.
• STEREO : The standard stereo sound
• 1/L : The sound of the left channel (monaural)
• 2/R : The sound of the right channel (monaural)
9 9
9 9
33
35