Receiving A Selective Call F - Motorola CDM1550-LS+ User Manual

• If the Selective Call cannot be estab-
• If all channels are busy while attempt-
• ( to end the Selective Call and
4 Press the PTT button to talk; release to
listen.
48
English
lished,
1R $FNQRZOHGJH
you see:
for 5 seconds. The LED indicator turns
off.
ing a Selective Call,
6\VWHP %XV\
you see:
and will hear a delayed busy tone as
long as the PTT button is pressed.
If the PTT button is kept pressed and
the system frees up a channel, the
radio automatically attempts to re-
establish the call.
revert to talkgroup dispatch, or press
the preprogrammed Selective Call but-
ton. You can then manually re-initiate
the call. (See Step 1.)
5 ( to end the Selective Call.
Note: If the Selective Call has prematurely
ended,
you see:
and a tone sounds (if prepro-
grammed by your dealer).
Receiving a Selective Call
1 When you receive a Selective Call:
• The F blinks and, if preprogrammed by
your dealer, the yellow LED indicator
lights steady.
You see:
followed by the preprogrammed alias
or ID of the calling radio.
• Once the Selective Call is established
the F displays solid.
Note: If preprogrammed by your dealer,
your radio sounds a short high-
pitched tone (call established tone)
to indicate that you are ready to
engage in a conversation.
&DOO (QGHG
F
,QFRPLQJ &DOO