Ptt Id Alias; Roam Request; To Start A Roam Request - Motorola CDM1550-LS+ User Manual

The display indicates the Home Site
ID (HSID) and Mobile Identification
Number (MIN).
XXX indicates the HSID, YYYYY
indicates the MIN.
Note:

PTT ID ALIAS

Your CDM1550•LS+ radio supports the display
of the Alias of the calling radio when receiving
a group dispatch call in PassPort mode. This
Alias corresponds to the MIN of the calling
radio in the Radio Call List.
Note:
38
English
,$0 ;;; - <<<<<
This message can still be activated
even if your radio is not registered.
Alias will be displayed only if
preprogrammed in the radio via the
PassPort Customer Programming
Software (PPCPS). Otherwise, the
MIN is displayed.

ROAM REQUEST

Because of the RSSI feature, your
CDM1550•LS+ radio automatically roams to an
affiliated site when the signal from the
registered site becomes too weak for quality
communication. This RSSI threshold is
programmed by your dealer. However, if you
believe the signal strength would be better on
another site, you may want to manually initiate
the roaming process. This feature is called
Roam Request.

To Start a Roam Request

1 Press the preprogrammed Roam
Request button (see page 22).
2 When the radio is searching for a new
site or attempting registration to a site,
you see on the display:
6($5&+,1*