Selecting A Trunked Zone And Talkgroup; Sending A Trunked Call; To Send A Trunked Call - Motorola CDM1550-LS+ User Manual

Hide thumbs Also See for CDM1550-LS+:
Table of Contents

Advertisement

SELECTING A TRUNKED ZONE
AND TALKGROUP
Up to 15 PassPort and/or LTR trunked zones
(containing 16 talkgroups each) can be
programmed into your radio.
To select a trunked zone and talkgroup:
v or w to select the appropriate
1
trunked zone.
y or z until you see the desired
2
preprogrammed talkgroup on the display.
28
English
Note: N (the PassPort Zone symbol)
appears when a PassPort Zone has
been selected.

SENDING A TRUNKED CALL

To Send a Trunked Call

1
Hold the microphone in a vertical position
at a distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.
2
Press and hold the PTT button.
–or–
Press and release the PTT button and
wait 3 seconds.
If access to the trunked system was
successful, the red LED indicator
lights steady.
In addition, your dealer can
program your radio to sound a
short, high-pitched (talk permit)
tone, indicating successful trunked
system access.
If access to the trunked system was
unsuccessful, the red LED indicator
flashes and a low-pitched (talk
prohibit) tone sounds, indicating that
the system was busy or out-of-range.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents