To Stop Auto Group Scan; All Group Scan; To Start Or Stop All Group Scan Operation Through A Preprogrammed Button; To Start Or Stop All Group Scan Operation Through The Menu - Motorola CDM1550-LS+ User Manual

The G symbol appears on the display
•
when non-prioritized Auto Group Scan has
been activated.
The H symbol appears on the display
•
when prioritized Auto Group Scan has
been activated.
• There is no LED indicator during Auto
Group Scan.

To Stop Auto Group Scan

Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.

ALL GROUP SCAN

(LTR TRUNKED OPERATION ONLY)
All Group Scan scans all talkgroups within the
selected LTR trunked zone.
When All Group Scan is enabled:
The G symbol appears on the display.
•
• The green LED blinks during All Group
Scan operation; it stops blinking when the
radio switches to an active talkgroup.
Note:
72
English
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
To Start or Stop All Group Scan Operation
through a Preprogrammed Button
(see page 17)
• Press the preprogrammed All Group Scan
button once to start All Group Scan.
• Press the preprogrammed All Group Scan
button again to stop All Group Scan.
–or–
To Start or Stop All Group Scan Operation
through the Menu
1 ) to enter menu mode.
2 y or z until
3 ) to select
You see the current scan status.
4 y or z until
–or–
5 ) to confirm your selection.
$OO *URXS 6FDQ
$OO *URXS 6FDQ
$OO *URXS 2Q"
$OO *URXS 2II"