Passport Primary Auto Group Scan (Passport Trunked Operation Only); Passport Group Scan G (Passport Trunked Operation Only); When Passport Group Scan Is Enabled - Motorola CDM1550-LS+ User Manual

PASSPORT PRIMARY AUTO
GROUP SCAN
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Primary Auto Group Scan
automatically scans the primary (first)
talkgroup within the selected PassPort zone.
Any time you are positioned on a PassPort
talkgroup other than the first one, your radio
automatically scans activity on the first
talkgroup within that zone.
Note:
PASSPORT GROUP SCAN G
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Group Scan scans talkgroups within
the selected PassPort trunked zone, as
programmed by your dealer. Up to 16 different
talkgroups can be programmed into each Scan
list, with one Scan list assigned to each position
on the Zone Selector. You can edit these Scan
lists through your radio's menu (see page 74).
70
English
This feature is enabled AUTOMATICALLY
with your radio. It is not enabled through
the radio menu or through a
preprogrammed scan button.

When PassPort Group Scan is Enabled

The G symbol appears on the display.
•
• The LED indicator blinks green during
PassPort Group Scan operation; it stops
blinking when the radio switches to an
active talkgroup or channel.
Note:
• PassPort Group Scan is not available when
registered on an affiliated (non-home) site.
• If you switch to another PassPort zone, LTR,
or conventional zone while the radio is
scanning, scanning resumes upon return to
the PassPort zone where PassPort Group
Scan was enabled.
• If the radio is turned off while scanning, the
radio resumes scanning when you turn it back
on. If the radio registers on a non-home site,
scanning is not enabled until the radio regis-
ters at its home site.