Special Tools - Yamaha 2012 Grizzly 300 Service Manual

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools; this will help prevent damage caused by the use of inappropriate
tools or improvised techniques. Special tools may differ by shape and part number from country to
country. In such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
For US and CAN
P/N. YM-, YU-, YS-, YK-, ACC-
Except for US and CAN
P/N. 90890
Tool No.
Bolt
Slide hammer bolt (M5)/weight
90890-04158
YM-04158
Weight
90890-01084
This tool is used to remove the rocker arm
YU-01083-3
shaft.
Crankcase separating tool
Crankcase separator
90890-04152
YU-A9642
This tool is used to separate the crankcase.
Rotor holding tool
90890-01235
YU-01235
This tool is needed to hold the starter puller
when removing/installing the starter puller
bolt or camshaft sprocket bolts.
Ring nut wrench
Spanner wrench
90890-01268
YU-01268
This tool is used to adjusting the front shock
absorbers.
Piston pin puller
90890-01304
YU-01304
This tool is used to remove the piston pin.
Tappet adjusting tool (3 mm)
Six piece tappet set
90890-01311
YM-A5970
These tools are necessary for adjusting the
valve clearance.
SPECIAL TOOLS
Tool name/Function
1-5
GEN
INFO
Illustration