Yamaha 2012 Grizzly 300 Service Manual page 116

CHECKING AND CHARGING THE BATTERY
2
1
3-58
6. Install:
• battery
7. Connect:
• battery leads
(to the battery terminals)
NOTICE
First, connect the positive battery lead
and then the negative battery lead
8. Check:
• battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
9. Lubricate:
• battery terminals
Recommended lubricant
Dielectric grease
10.Install:
• battery holding plate
• seat
Refer to "SEAT, FENDERS AND FUEL
TANK".
CHK
ADJ
,
.