Changing The Transfer Gear Oil - Yamaha 2012 Grizzly 300 Service Manual

CHANGING THE TRANSFER GEAR OIL

CHANGING THE TRANSFER GEAR OIL
1. Place the machine on a level surface.
2. Place a receptacle under the transfer gear
case.
3. Remove:
• right footboard
• right side cover
• seat
4. Remove:
• transfer gear filling bolt
• transfer gear oil drain bolt
5. Drain:
• transfer gear oil
6. Install:
• transfer gear oil drain bolt
TIP
Check the gasket (drain bolt). If it is damaged,
replace it with a new one.
7. Fill:
• transfer gear case
Total amount
1.30 L (1.37 US qt) (1.14 Imp.qt)
Recommended oil
SAE 90 API GL-5 Hypoid gear oil
NOTICE
_
Take care not to allow foreign material to
enter the transfer gear case.
8. Install:
• transfer gear filling bolt
9 . Install:
• right footboard
• right side cover
• seat
Refer to "SEAT, SIDE COVERS AND
FOOTREST BOARDS".
3-42
CHK
ADJ
40 Nm (4.0 m·kgf, 28.9 ft·lbf)
15 Nm (1.5 m·kg, 10.8 ft·lb)