Table of Contents
Advertisement
2. Getting Started
2.1
Baby Unit Power Supply
DC JACK
DC PLUG
1. Connect the DC plug of the power adapter to the DC jack at the bottom of
the Baby Unit and the other end to the mains power.
NOTE
Only use the supplied power adapter (5V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position.
The power LED will light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Battery Installation
1. Insert the wire tabs of the rechargeable battery pack into the contact slots
as shown above and fit the battery pack into the compartment.
2. Place the battery compartment cover over the battery, making sure that
the battery wires are carefully pushed down and the cover fits properly.
Getting Started
DC Jack
Black
Red
DC Plug
9
Hide quick links:
Advertisement
Table of Contents
